[App_rpt-users] USB Adapter has no EEPROM installed

Jim Duuuude telesistant at hotmail.com
Sun Nov 1 19:08:08 EST 2015


Yes, this is what we "lovingly" call the "USB shuffle". :-)

Jim

> Date: Sun, 1 Nov 2015 18:43:04 -0500
> From: jrorke at cogeco.ca
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] USB Adapter has no EEPROM installed
> 
> Actually this is easily fixed. First set up the first node and do all 
> audio cals.
> Then save the with radio tune save. That also saves the usb slot that 
> URI /Fob is connected to in the tune file for that node.
> 
> Plug in the second uri and make the second node active. Then setup the 
> the second node and audio cals. Then save the radio tune settings to 
> save the usb slot for that node in the second tune file.
> 
> Now if you reboot the box it should remember which nodes are on what URI.
> 
> I have done this with many nodes with multiple nodes and it works all 
> the time. If you dont do this when setting up the nodes the URIs will 
> get jumbled up as its a crap shoot at boot up when the sw will detect 
> the usb devices.
> 
> Jon VA3RQ
> 
> 
> 
> On 11/1/2015 6:38 PM, Bryan Fields wrote:
> > On 11/1/15 3:04 PM, Jim Duuuude wrote:
> >> (the USB stuff leaves a lot to be desired as far
> >> as port/device identification, and if you "move stuff around", it can be VERY hard to deal with).
> > This, so much this.  I had a friend who was ragging on asterisk/allstar
> > sounding like crap, even after it was adjusted proper.
> > I helped him set it up and indeed it was back to sounding like crap the next week.
> >
> > Turns out his USB adapters were randomly coming up as different nodes when the
> > server would reboot.  I put a pciradio card in there and solved it.
> >
> > Can't really say enough good things about those pciradio cards.
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151101/4808811b/attachment.html>


More information about the App_rpt-users mailing list