[App_rpt-users] App_rpt-users Digest, Vol 81, Issue 18

Mark DuMoulin @ WB2ERS wb2ers at metcom.com
Fri Nov 6 15:55:11 EST 2015


Hello all,

I'm trying to configure a URI USB FOB on my ACID Server.
I appear to have everything set up ok however my CTCSS polarity (Pin 7 of the URI) is reporting activity inverted.
I have tried setting ctcssfrom=usbinvert however it does not invert the signal.
I am not using COS. I have it set to carrierfrom=no

Any ideas anyone?

Mark DuMoulin
WB2ERS
Wb2ers at metcom.com
C 800-410-3130



-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of app_rpt-users-request at ohnosec.org
Sent: Wednesday, November 04, 2015 12:00 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 81, Issue 18

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. RFI on Baofeng Node with sound fob. (Skyler F)
      (B. McIntosh [Pace])
   2. Re: Rambling thoughts... (David KE6UPI)
   3. CIV Control for Kenwood TS-2000 (Randall Wright)


----------------------------------------------------------------------

Message: 1
Date: Tue, 3 Nov 2015 17:45:28 -0000
From: "B. McIntosh [Pace]" <bmcintosh at paceprofessional.co.uk>
To: <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] RFI on Baofeng Node with sound fob. (Skyler
	F)
Message-ID: <E6CABF88870B4B338CFC9783AE1C3822 at HPBernie>
Content-Type: text/plain;	charset="us-ascii"

Hi,

The node that I built for a Baofeng UV5R is not the cleanest sounding in the world.  There is a slightly perceptible "buzzing" on TX audio. It doesn't get a lot of use and its purpose in life is as part of an emcomm system.
The speech itself comes over sifficiently clear so I haven't tried anything yet to cure it. 

This one uses the DMK URI and is built into  a Hammond diecast box. You can see photos of it at http://www.feednet.org.uk/remotebase.htm

73

Bernie
GM4WZG



-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of app_rpt-users-request at ohnosec.org
Sent: 03 November 2015 17:00
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 81, Issue 17

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. RFI on Baofeng Node with sound fob. (Skyler F)


----------------------------------------------------------------------

Message: 1
Date: Tue, 3 Nov 2015 08:54:09 -0700
From: Skyler F <electricity440 at gmail.com>
To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: [App_rpt-users] RFI on Baofeng Node with sound fob.
Message-ID:
	
<CAJNyT09tu=M13ZxTLWPA+mo9LPKOqE39Qmx3yMGvr1FqzVq5LA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

To this day every Baofeng Node with a modified sound fob I have 
built has had some RF problem or another.

The first node had a horrible bus noise whine through the 
transmit audio.

My next nodes have weird issues, where when the transmitter 
drops, the node double-keys or even triple-keys, and I hear the 
courtesy beep a few times.

Lastly, the sound fob is giving me a lot of RF noise on all UHF 
frequencies while my node is not transmitting and will break a 
Carrier Squelch handheld if the HT is within 5 feet or so of the node.

How does this node not have any problems?:

http://www.kg5ebi.com/uncategorized/the-smallest-all-star-node/

What is the best way to kill this RF issue?


Skyler KD0WHB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20151103
/5a404a5f/attachment-0001.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 81, Issue 17
*********************************************




------------------------------

Message: 2
Date: Tue, 3 Nov 2015 18:52:27 -0800
From: David KE6UPI <dshaw at ke6upi.com>
To: Jeff Carrier <k0jsc.jeff at gmail.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Rambling thoughts...
Message-ID:
	<CAH4RvbKw2Jrthf8uTVx37Frp3brvEpe+=-h_vTY5ZwFDOvU5rw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Well I was going to try HSMM-Pi and see how it works. By the looks of it
they are going asterisk via HSMM-Pi.

QoS is your friend with Asterisk.

David

On Tue, Nov 3, 2015 at 6:30 AM, Jeff Carrier <k0jsc.jeff at gmail.com> wrote:

> I was speaking more from a private point to point environment. We're doing
> it from border to border in Colorado.  I agree, the mesh network sounds
> cool till you factor in all the variables as you indicated.  It may be
> possible with mesh but probably not worth the headache.
> On Nov 3, 2015 7:24 AM, "Bryan Fields" <bryan at bryanfields.net> wrote:
>
>> Where has this been deployed with any success?
>>
>> On November 3, 2015 9:19:51 AM EST, Jeff Carrier <k0jsc.jeff at gmail.com>
>> wrote:
>>>
>>> It can
>>> On Nov 3, 2015 7:07 AM, "Brian Gieryk" <ke6iyc at mac.com> wrote:
>>>
>>>> Any reason Allstar could not be run over an installation of a
>>>> Broadband-Hamnet network?
>>>>
>>>> Just thinking of an infrastructure independent network with the
>>>> functionality of Allstar.
>>>>
>>>> Brian
>>>> KE6IYC
>>>>
>>>> Sent from my iPhone
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>>> down to the bottom of the page. Enter your email address and press the
>>>> "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>> ------------------------------
>>>
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>>
>> --
>> Bryan Fields
>> 727-409-1194
>> http://bryanfields.net
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20151103/87851908/attachment-0001.html>

------------------------------

Message: 3
Date: Tue, 3 Nov 2015 21:34:59 -0600
From: Randall Wright <wright.randall at yahoo.com>
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] CIV Control for Kenwood TS-2000
Message-ID: <387CC2EF-1229-4C9B-97C1-C1C7761539AF at yahoo.com>
Content-Type: text/plain; charset=utf-8

Has anyone had any experience with CIV control for the Kenwood TS2000?  Any info would be appreciated.

Thanks and 73?s.

Randall Wright
KM4LKU

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 81, Issue 18
*********************************************



More information about the App_rpt-users mailing list