[App_rpt-users] DIAL

Steve Zingman szingman at msgstor.com
Sun Nov 8 08:52:24 EST 2015

Good to hear everything is going well. What hardware are you running on?

73, Steve N4IRS

On 11/08/2015 04:47 AM, 41.2 Jim wrote:
> FYI:
>     I've installed the new DIAL, Debian version software, upgrading 
> from the ACID install for Allstarlink and I could not be any 
> happier.... I found the install so much easier to install and could 
> say it "holds your hand" all the way through, and any mistakes can 
> easily be restarted again with a simple command,(portal, network 
> ect..) . At least I found it a lot more simple than the ACID install.
>    It has been rock solid since the install, about 3 weeks now, and is 
> faster in every way, the reboot is only a 10 seconds until you are 
> back to the log in, as my ACID install would hang at the "sendmail" 
> part of the re-load.
>      I am a Windows guy and I know almost nothing about Linux, this 
> new software was "Cake" to install
> I have now started to help friends to upgrade to the new DIAL 
> software, as I said it's very easy change. Thought you all should know
> Thanks to all that was involved in this new software
>            Jim Frederick KF6QBW
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151108/da16b150/attachment.html>

More information about the App_rpt-users mailing list