[App_rpt-users] Remote Base Timeout

Jamey Wright jamey.wright at charter.net
Mon Nov 9 19:56:14 EST 2015

In rpt.conf, Under the repeater node stanza:












Under the remote base node stanza, none of this exists.





From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Zingman
Sent: Monday, November 09, 2015 5:14 AM
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Remote Base Timeout


What are your settings for:


73, Steve N4IRS

On 11/08/2015 10:18 PM, Jamey Wright wrote:

I have a 2M remote base (TM-271) running on a node here.  How can I change
the activity timeout?  There have been several instances where I have been
actively using the node and I get an activity timeout message.  First it
will announce timeout in 180 seconds.  If I do anything like change power
level, frequency, etc, it then announces activity timeout in 3597 seconds,
then about 15 seconds later announces activity timeout in 3604 seconds and
continues to announce activity timeout every 30 seconds or so.
Disconnecting and reconnecting is the only way to stop the countdown.






App_rpt-users mailing list
App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> 
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 

"Anything is possible if you don't know what you are talking about."
1st Law of Logic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151109/8d64b869/attachment.html>

More information about the App_rpt-users mailing list