[App_rpt-users] Remote Base Timeout

Steve Passmore k6kya at hokeynet.net
Mon Nov 9 21:29:57 EST 2015


Your example has all but one line commented out.
Be sure to remove the semicolon at the start of the line for any settings
you are editing.
The semicolon is known as a comment mark and anything on the line after it
is ignored so changing the value will have no effect.
On Nov 9, 2015 4:56 PM, "Jamey Wright" <jamey.wright at charter.net> wrote:

> In rpt.conf, Under the repeater node stanza:
>
>
>
> ;discpgm=yourdisconnectprogram
>
> ;lnkactenable=0
>
> ;lnkacttime=1800
>
> ;lnkactmacro=*52
>
> ;lnkacttimerwarn=30seconds
>
> ;remote_inact_timeout=1800
>
> ;remote_timeout=3600
>
> nounkeyct=1
>
> ;holdofftelem=0
>
>
>
> Under the remote base node stanza, none of this exists.
>
>
>
> Jamey
>
> WR4JW
>
>
>
> *From:* app_rpt-users-bounces at ohnosec.org [mailto:
> app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Steve Zingman
> *Sent:* Monday, November 09, 2015 5:14 AM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] Remote Base Timeout
>
>
>
> Jamey,
> What are your settings for:
>
> remote_inact_timeout
> remote_timeout
>
> 73, Steve N4IRS
>
> On 11/08/2015 10:18 PM, Jamey Wright wrote:
>
> I have a 2M remote base (TM-271) running on a node here.  How can I change
> the activity timeout?  There have been several instances where I have been
> actively using the node and I get an activity timeout message.  First it
> will announce timeout in 180 seconds.  If I do anything like change power
> level, frequency, etc, it then announces activity timeout in 3597 seconds,
> then about 15 seconds later announces activity timeout in 3604 seconds and
> continues to announce activity timeout every 30 seconds or so.
> Disconnecting and reconnecting is the only way to stop the countdown.
>
>
>
> Thanks
>
>
>
> Jamey
>
> WR4JW
>
>
>
>
> _______________________________________________
>
> App_rpt-users mailing list
>
> App_rpt-users at ohnosec.org
>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> --
>
> "Anything is possible if you don't know what you are talking about."
>
> 1st Law of Logic
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151109/16827dc8/attachment.html>


More information about the App_rpt-users mailing list