[App_rpt-users] Remote Base Timeout

Jamey Wright jamey.wright at charter.net
Tue Nov 10 20:20:22 EST 2015


Added the missing lines back into the conf file.  Will see how it works out.

 

Jamey

WR4JW

 

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Passmore
Sent: Monday, November 09, 2015 8:30 PM
To: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Remote Base Timeout

 

Your example has all but one line commented out. 
Be sure to remove the semicolon at the start of the line for any settings you are editing. 
The semicolon is known as a comment mark and anything on the line after it is ignored so changing the value will have no effect. 

On Nov 9, 2015 4:56 PM, "Jamey Wright" <jamey.wright at charter.net <mailto:jamey.wright at charter.net> > wrote:

In rpt.conf, Under the repeater node stanza:

 

;discpgm=yourdisconnectprogram

;lnkactenable=0

;lnkacttime=1800

;lnkactmacro=*52

;lnkacttimerwarn=30seconds

;remote_inact_timeout=1800

;remote_timeout=3600

nounkeyct=1

;holdofftelem=0

 

Under the remote base node stanza, none of this exists.

 

Jamey

WR4JW

 

From: app_rpt-users-bounces at ohnosec.org <mailto:app_rpt-users-bounces at ohnosec.org>  [mailto:app_rpt-users-bounces at ohnosec.org <mailto:app_rpt-users-bounces at ohnosec.org> ] On Behalf Of Steve Zingman
Sent: Monday, November 09, 2015 5:14 AM
To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org> 
Subject: Re: [App_rpt-users] Remote Base Timeout

 

Jamey,
What are your settings for:

remote_inact_timeout
remote_timeout

73, Steve N4IRS

On 11/08/2015 10:18 PM, Jamey Wright wrote:

I have a 2M remote base (TM-271) running on a node here.  How can I change the activity timeout?  There have been several instances where I have been actively using the node and I get an activity timeout message.  First it will announce timeout in 180 seconds.  If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so.  Disconnecting and reconnecting is the only way to stop the countdown.

 

Thanks

 

Jamey

WR4JW





_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151110/ecf74ac3/attachment.html>


More information about the App_rpt-users mailing list