[App_rpt-users] Asterisk reboots-Clocking error

Tim Sawyer tisawyer at gmail.com
Fri Nov 13 18:45:44 EST 2015


Not sure what you want to do, but assuming you want to tie a bunch of
controllers together, replacing 420 links for example,
you don't need radbridge to bridge RTCMs. Just put all the RTCM under one
node in voter.conf. The secret here is mixminus which stops a second repeat
path back to the RTCM.

rpt.conf:

rxchannel=Voter/501

duplex=0

linktolink = yes


voter.conf:

[501]

SITE1 = passwrd1,transmit,nodeemp,noplfilter

SITE2 = passwrd2,transmit,nodeemp,noplfilter

SITE3 = passwrd3,transmit,nodeemp,noplfilter

buflen = 250

mixminus = y

plfilter = n



On Fri, Nov 13, 2015 at 9:47 AM, Mark DuMoulin @ WB2ERS <wb2ers at metcom.com>
wrote:

> Hello All,
>
>
>
> I am running ACID with URI connected.
>
> I also have repeaters using RTCM units.
>
> When I attempt to use radbridge.conf to combine RTCM and URI as shown
> below:
>
>
>
> [general]
>
> instance1 = Voter/rtcm,Radio/usb
>
>
>
> This is what happens:
>
>
>
> [Nov 13 12:37:01] NOTICE[12655]: chan_usbradio.c:3273 usbradio_request:
> Already have a call (chan 0x91b4d18) on the usb channel
>
> [Nov 13 12:37:03] NOTICE[12613]: app_rpt.c:22002 rpt_master: RPT thread
> restarted on 1448
>
> [Nov 13 12:37:03] WARNING[12613]: app_rpt.c:22014 rpt_master: rpt_thread
> restarted on node 1448
>
>     -- Re-Loading config for repeater 1448
>
> [Nov 13 12:37:03] NOTICE[12656]: chan_usbradio.c:3273 usbradio_request:
> Already have a call (chan 0x91b4d18) on the usb channel
>
> [Nov 13 12:37:05] ERROR[12613]: app_rpt.c:21997 rpt_master: *Continual
> RPT thread restarts, killing Asterisk*
>
>
>
> Does anyone have any thoughts as to why this is occurring or a different
> approach on combining the URI and RTCM end points?
>
> Mark DuMoulin
>
> WB2ERS
>
> Wb2ers at metcom.com
>
> C 800-410-3130
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151113/cdaada38/attachment.html>


More information about the App_rpt-users mailing list