[App_rpt-users] Unregistered nodes.

Steve Zingman szingman at msgstor.com
Wed Nov 25 06:34:18 EST 2015


Alberto,
If you stop and restart asterisk it should get a address of 
67.215.233.178 under host.

Add the following to have asterisk get the address the first time it is 
started.
cd /etc/asterisk
wget https://github.com/N4IRS/AllStar/raw/master/configs/dnsmgr.conf
restart asterisk

Steve


On 11/25/2015 06:19 AM, Alberto Enrique Puig wrote:
> Hi everyone on the group,
>
> I I have tried helping some friends installing the new DIAL version of 
> AllStar Link on X86 thin client computers. Everything goes fine but 
> some nodes do not  register on the system. Here one example:
>
> Connected to Asterisk 1526 currently running on KP4CV (pid = 613)
> Verbosity is at least 3
> KP4CV*CLI> iax2 show registry
> Host                  dnsmgr  Username    Perceived Refresh  State
> 0.0.0.0:4569          N       42642 <Unregistered>             60  
> Unregistered
> KP4CV*CLI>
>
> Have I missed something? Any help will be welcome.
>
> Thanks,
>
> Alberto KP4AP node 40660
>
> 73s
>
> > From: app_rpt-users-request at ohnosec.org
> > Subject: App_rpt-users Digest, Vol 81, Issue 42
> > To: app_rpt-users at ohnosec.org
> > Date: Tue, 24 Nov 2015 12:00:02 -0500
> >
> > Send App_rpt-users mailing list submissions to
> > app_rpt-users at ohnosec.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > or, via email, send a message with subject or body 'help' to
> > app_rpt-users-request at ohnosec.org
> >
> > You can reach the person managing the list at
> > app_rpt-users-owner at ohnosec.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of App_rpt-users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: CSV File of Active Nodes (HB9EYQ)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 24 Nov 2015 09:16:27 +0100
> > From: HB9EYQ <hb9eyq at gmail.com>
> > To: "Bryan D. Boyle" <bdboyle at bdboyle.com>
> > Cc: app_rpt-users at ohnosec.org
> > Subject: Re: [App_rpt-users] CSV File of Active Nodes
> > Message-ID: <902074CB-8E75-4205-99CE-3CAFE49D8F2C at gmail.com>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Very nice, what is the data source?
> >
> > -Larry
> >
> > > On 22.11.2015, at 21:24, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
> > >
> > >
> > > excellent starting point...and close, but with some hacking on my 
> part...
> > >
> > > Thanks!
> > > --
> > > Bryan
> > > Sent from my iPhone 6S...No electrons were harmed in the sending 
> of this message.
> > >
> > >
> > >
> > >> On Nov 22, 2015, at 05:23, larry <larry at n7fm.com> wrote:
> > >>
> > >> Bryan,
> > >>
> > >> I have a PHP script that I run in a local linux terminal as well 
> as a version on my web site for a few friends to use. 
> http://www.n7fm.com/allstar_node_info.php
> > >> Gives an idea. Not a beautiful display but works to keep track of 
> certain nodes without needing to hunt through the master list to check 
> an individual status.
> > >> I need to create a better display layout but never seem to find 
> the time. Projects, mine and others never end. Finish one have 2 more 
> waiting.
> > >>
> > >> Don't know if something along this line would work for you or if 
> you were looking for a main CVS file that only has a list with only 
> connected nodes to search rather than all that are online? The script 
> does not display ALL nodes connected. It uses a list (Array) of your 
> selected node numbers. Stripping the status of each node in the array 
> from the master list. It displays the connection status of those 
> particular nodes.
> > >>
> > >> Friends and I have Allstar nodes on our different repeaters as 
> well as some links that we need to keep a check on their status.
> > >>
> > >> I got tired jumping all over the main file to check them. With 
> multiple servers scattered about that became a pain. My son listening 
> to me whine wrote me a script that checks the status of each node I 
> add to an array. Nothing fancy but it lets me check all entered nodes 
> status with a single script to see if and who is connected.
> > >>
> > >> Larry - N7FM
> > >>
> > >>
> > >> Bryan,
> > >>
> > >> I have a PHP script that I run in a local linux terminal as well 
> as a version on my web site for a few friends to use. 
> http://www.n7fm.com/allstar_node_info.php
> > >> Gives an idea. Not a beautiful display but works to keep track of 
> certain nodes without needing to hunt through the master list to check 
> an individual status.
> > >> I need to create a better display layout but never seem to find 
> the time. Projects, mine and others never end. Finish one have 2 more 
> waiting.
> > >>
> > >> Don't know if something along this line would work for you or if 
> you were looking for a main CVS file that only has a list with only 
> connected nodes to search rather than all that are online? The script 
> does not display ALL nodes connected. It uses a list (Array) of your 
> selected node numbers. Stripping the status of each node in the array 
> from the master list. It displays the connection status of those 
> particular nodes.
> > >>
> > >> Friends and I have Allstar nodes on our different repeaters as 
> well as some links that we need to keep a check on their status.
> > >>
> > >> I got tired jumping all over the main file to check them. With 
> multiple servers scattered about that became a pain. My son listening 
> to me whine wrote me a script that checks the status of each node I 
> add to an array. Nothing fancy but it lets me check all entered nodes 
> status with a single script to see if and who is connected.
> > >>
> > >> Larry - N7FM
> > >>
> > >>
> > >>
> > >>
> > >>> On 11/20/2015 07:24 PM, Bryan D. Boyle wrote:
> > >>> yup. lots of nodes, but only between 1400-1500 active at any 
> given time...
> > >>>
> > >>> though, the master list is pretty good, but what i'm looking 
> for...no worries. was just a thought.
> > >>>
> > >>> --
> > >>> Bryan
> > >>> Sent from my iPhone 6S...No electrons were harmed in the sending 
> of this message.
> > >>>
> > >>>
> > >>>
> > >>> On Nov 20, 2015, at 20:23, George Csahanin <george at dyb.com> wrote:
> > >>>
> > >>>> I *think* what he means is something that can show the 
> connection status, like what the bubble diagram shows.
> > >>>>
> > >>>> GeorgeC
> > >>>> W2DB
> > >>>> Cedar Park, TX node 2360
> > >>>>
> > >>>>> On 11/20/2015 12:29 PM, k5tra wrote:
> > >>>>> Bryan, you can make your own CSV file from: 
> /var/lib/asterisk/rpt_extnodes . This is the current database file on 
> your server.
> > >>>>> TRA
> > >>>> _______________________________________________
> > >>>> App_rpt-users mailing list
> > >>>> App_rpt-users at ohnosec.org
> > >>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >>>>
> > >>>> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> > >>>> You do not need a password to unsubscribe, you can do it via 
> email confirmation. If you have trouble unsubscribing, please send a 
> message to the list detailing the problem.
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> App_rpt-users mailing list
> > >>> App_rpt-users at ohnosec.org
> > >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >>>
> > >>> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> > >>> You do not need a password to unsubscribe, you can do it via 
> email confirmation. If you have trouble unsubscribing, please send a 
> message to the list detailing the problem.
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at ohnosec.org
> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: 
> <http://ohnosec.org/pipermail/app_rpt-users/attachments/20151124/86475b9a/attachment-0001.html>
> >
> > ------------------------------
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> >
> > End of App_rpt-users Digest, Vol 81, Issue 42
> > *********************************************
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151125/25f98806/attachment.html>


More information about the App_rpt-users mailing list