[App_rpt-users] Help on the obvious please !

mike at midnighteng.com mike at midnighteng.com
Wed Nov 25 13:25:12 EST 2015


Hostname = local ip or host name

User & pass = whatever you set-up in iax.conf
ex:

[gui]
type=user
context=radio-gui  ;user
username=gui
auth=md5
secret=PASS       ;pass
host=dynamic
disallow=all
allow=gsm
notransfer=yes


Hope it helped a little.

...mike/kb8jnm


> I am not a guru on AllStar so need help on the obvious:
>
> How do I obtain the following information for any given node on the system for
> configuration of iaxRpt client? :
>
>
> For iaxRpt I need:
>
>         1;)  How do I obtain the IP address for any given node on the system?
> 	2.) The host is IPaddress, right ?
> 	3.) Username for that system
> 	4.) Password for that system
>
> For example, I am trying to configure iaxRp client t and need to know the
> information and the host / username / password
>
> From my own system I can get this dump:
> Can I get this from any given user on the system -or-
> Can I assume that  “allstar-public” with password of “allstar” is
> universally installed ??
>
>
> KM6HK*CLI> iax2 show users
> Username         Secret                Authen           Def.Context      A/C
> Codec Pref
> gui              dan94025              000000000000002  radio-gui        No
> Host
> allstar-public   allstar               000000000000002  allstar-public   No
> Host
> allstar-sys      Key: allstar          000000000000004  allstar-sys      No
> Host
> radio            -no secret-           000000000000003  radio-secure     No
> Host
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.





More information about the App_rpt-users mailing list