[App_rpt-users] Echolink Setting

David KE6UPI dshaw at ke6upi.com
Thu Nov 26 03:11:22 EST 2015


Thanks Team,, Jim you hit the nail on the head...

David

On Wed, Nov 25, 2015 at 10:55 PM, Michael Hebert <mhebert1975 at gmail.com>
wrote:

> Do you have the echolink.conf setup?
>
> http://ohnosec.org/drupal/node/56
>
>
> On Thu, Nov 26, 2015 at 12:47 AM, David KE6UPI <dshaw at ke6upi.com> wrote:
>
>> Hello Team, I'm running RPi2 and I can seem to get Echolink to work. Does
>> anyone have it running on RPi2??
>>
>> Thanks, David
>> KE6UPI
>>
>> On Wed, Nov 25, 2015 at 3:10 PM, Jamey Wright <jamey.wright at charter.net>
>> wrote:
>>
>>> Here is a snip from rpt.conf
>>>
>>> [41902]                                 ; Change this to your assigned
>>> node number
>>>
>>> rxchannel=Zap/pseudo
>>> erxgain=-3
>>> etxgain=3
>>> eannmode=2
>>> ;controlstates=controlstates
>>> scheduler=schedule41902
>>>
>>> -----Original Message-----
>>> From: Buddy Brannan [mailto:buddy at brannan.name]
>>> Sent: Tuesday, November 24, 2015 10:23 PM
>>> To: Jamey Wright <jamey.wright at charter.net>
>>> Subject: Re: [App_rpt-users] Echolink Setting
>>>
>>> Hmm. Shouldn't matter. Where in the file did you put the statement? It
>>> should be in the section where you're defining your node.
>>>
>>> --
>>> Buddy Brannan, KB5ELV - Erie, PA
>>> Phone: 814-860-3194
>>> Mobile: 814-431-0962
>>> Email: buddy at brannan.name
>>>
>>>
>>>
>>>
>>> > On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright at charter.net>
>>> wrote:
>>> >
>>> > Yes, I did restart Asterisk.  BTW, my system is running ACID.
>>> >
>>> > Jamey
>>> > WR4JW
>>> >
>>> > -----Original Message-----
>>> > From: Buddy Brannan [mailto:buddy at brannan.name]
>>> > Sent: Tuesday, November 24, 2015 9:27 PM
>>> > To: Jamey Wright <jamey.wright at charter.net>
>>> > Subject: Re: [App_rpt-users] Echolink Setting
>>> >
>>> > Dumb question:
>>> > Did you remember to either restart asterisk or reload your rpt.conf
>>> file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")?
>>> >
>>> > --
>>> > Buddy Brannan, KB5ELV - Erie, PA
>>> > Phone: 814-860-3194
>>> > Mobile: 814-431-0962
>>> > Email: buddy at brannan.name
>>> >
>>> >
>>> >
>>> >
>>> >> On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright at charter.net>
>>> wrote:
>>> >>
>>> >> Does the command “eannmode = x” only work in newer distributions such
>>> as DIAL?  I added this to the rpt.conf on my system as eannmode = 2 but
>>> connects are still announced as node number only.
>>> >>
>>> >>
>>> >> Thanks
>>> >>
>>> >> Jamey
>>> >> WR4JW
>>> >> _______________________________________________
>>> >> App_rpt-users mailing list
>>> >> App_rpt-users at ohnosec.org
>>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> >>
>>> >> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> >> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>> >
>>> >
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20151126/c4fb5cea/attachment.html>


More information about the App_rpt-users mailing list