[App_rpt-users] Stuck Tx on System

Jesse Lloyd ve7lyd at gmail.com
Thu Sep 3 22:59:47 EDT 2015


K I'll try that. The Tx LED was on on the RTCM. 

Jesse


> On Sep 3, 2015, at 7:39 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> 
> Do a menu 98 in the RTCM telnet console while PTT is locked. Is the PTT asserted?
> 
>> On Thu, Sep 3, 2015 at 6:55 PM, Jesse Lloyd <ve7lyd at gmail.com> wrote:
>> Solid state meaning no spinner hard drive, that's all. 
>> 
>> Jesse
>> 
>>> On Sep 3, 2015, at 5:57 PM, ronald simpson <n6gkj1 at gmail.com> wrote:
>>> 
>>> OK ... I always assume that ALL modern personal computers in the public domain are SOLID STATE....
>>> 
>>>> On Sep 3, 2015 5:56 PM, "ronald simpson" <n6gkj1 at gmail.com> wrote:
>>>> OK maybe an industrial "tube type"  non-fanless x86 PC
>>>> 
>>>>> On Sep 3, 2015 5:47 PM, "Jesse Lloyd" <ve7lyd at gmail.com> wrote:
>>>>> Lol, no it's a new MSI industrial solid state fanless PC. Designed for use in industrial control settings or vehicular use. 
>>>>> 
>>>>> Jesse
>>>>> 
>>>>>> On Sep 3, 2015, at 5:40 PM, ronald simpson <n6gkj1 at gmail.com> wrote:
>>>>>> 
>>>>>> Maybe a "tube type" x86 pc??
>>>>>> 
>>>>>>> On Sep 3, 2015 3:29 PM, "Jesse Lloyd" <ve7lyd at gmail.com> wrote:
>>>>>>> Ya this is running on solid state x86 PC. I dug around the list a little and I'll have to do a rpt dump and see what's hanging it up, app-rpt or app-voter
>>>>>>> 
>>>>>>> I had this happen twice while I was in the asterisk console using voter display, maybe voter display has a bug that causes this, not sure. 
>>>>>>> 
>>>>>>> Thx, 
>>>>>>> 
>>>>>>> Jesse
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>>> On Sep 3, 2015, at 3:15 PM, "kk6ecm" <kk6ecm at gmail.com> wrote:
>>>>>>>> 
>>>>>>>> Not sure it's you issue, but I had the same experience on a Beagleboard-xM; kept rebooting, which would last awhile. I finally reseated the microSD memory card, and have not had an issue for many months now. the xM runs on the microSD card.
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> Thanks,
>>>>>>>> 
>>>>>>>> Bob
>>>>>>>> 
>>>>>>>> kk6ecm
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jesse Lloyd
>>>>>>>> Sent: Thursday, September 03, 2015 10:58 AM
>>>>>>>> To: app_rpt
>>>>>>>> Subject: [App_rpt-users] Stuck Tx on System
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> Hi All,
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> I've been monitoring my system, which consists of 4 RTCM's, and on occasion my Tx gets stuck after someone talks. It goes until it hits the time out timer. I'm viewing voter display x in Asterisk and there is no RTCM's selected and no RSSI shown for all clients so its not a stuck receiver. I have to do /etc/init.d/asterisk restart to kill the stuck PTT condition.
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> Any thoughts on how I should troubleshoot this?
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> Thx,
>>>>>>>> 
>>>>>>>>  
>>>>>>>> 
>>>>>>>> Jesse
>>>>>>>> 
>>>>>>>> _______________________________________________
>>>>>>>> App_rpt-users mailing list
>>>>>>>> App_rpt-users at ohnosec.org
>>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>> 
>>>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at ohnosec.org
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>> 
>>>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> -- 
> --
> Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150903/1d4e2318/attachment.html>


More information about the App_rpt-users mailing list