[App_rpt-users] RTCM Host LED Flashing

Jesse Lloyd ve7lyd at gmail.com
Fri Sep 4 16:40:09 EDT 2015


I did log in remotely, and it flashed debug information regarding loss of connectivity to server, then reconnected, then GPS re-lock messages. What I did was change the network duplex, and in the hour or so I didn't see any more of those messages. So maybd I had a Ethernet duplex mismatch. 

Also, I don't have the failover set on that site. 

Thx,
Jesse


> On Sep 3, 2015, at 7:36 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> 
> Interesting. I've never seen a host LED flash. Do you happen to have the fail over feature set?
> 
> Can you telnet to the RTCM so you don't have to visit the site? Also, the RTCM will log various things to the screen while your are telnet'd in. Perhaps that will provice a clew as to what's happening.
> 
> 
> 
>> On Thu, Sep 3, 2015 at 9:21 AM, Jesse Lloyd <ve7lyd at gmail.com> wrote:
>> Hey All,
>> 
>> I have 4 RTCM's setup, two are T/R sites (sites 1&2) and two are Rx only sites (sites 3&4) (Site 1 is the primary site). The systems been running for about 2 months now and one day we noticed that we lost the Tx side of site 2. The Host LED was flashing when we got there to troubleshoot, so we unplugging and re-plugging the network cable (causing the RTCM to reboot) which fixed the issue.  Wondering what I can do to troubleshoot/debug this, and what are the conditions that cause the Host LED to flash?
>> 
>> Thanks,
>> 
>> Jesse
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> -- 
> --
> Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20150904/0196657c/attachment.html>


More information about the App_rpt-users mailing list