[App_rpt-users] node setup assis!

Skyler F electricity440 at gmail.com
Sun Dec 25 09:26:56 EST 2016


The only good way I have found to not have to tear a Baofeng apart is the
use of this circuit:

https://www.youtube.com/watch?v=QopvHGM-9_k

It takes advantage of the DC offset present in the audio connector when
there is a signal. This is strongly recommended against a VOX circuit or
using VOX in AllStar software because of words getting cut out and
unnecessary key/unkey cycles.




On Sun, Dec 25, 2016 at 6:55 AM, Buddy Brannan <buddy at brannan.name> wrote:

> We'd love to help, but you'll probably need to be more specific. Which
> "it" are you having trouble with? What isn't working? You'll definitely
> need to set up the port forwarding in your router. Also, for best results,
> it's possible you may still need to mod your Baofeng to get audio from the
> right places, COS, and so on. That's way out of my league though. So where
> are things alling down?
>
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: 814-860-3194
> Mobile: 814-431-0962
> Email: buddy at brannan.name
>
>
>
>
> > On Dec 25, 2016, at 12:17 AM, Eric Lessard <lessarderic29 at yahoo.com>
> wrote:
> >
> > so I have a baofeng uv5r tri power with a pi 2 and a uri! the uri acts
> as my digital cable  so I don't have to tear the ht  apart ! I had a couple
> hams program it but we got into a fight stopped talking and I need help
> with finalizing my NODE setup and I'm thinking I should reprogram it?? any
> ideas?? + I need to figure out how to port forward it??? plz help!
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20161225/d10208ac/attachment.html>


More information about the App_rpt-users mailing list