[App_rpt-users] node setup assis!

Steven Donegan donegan at donegan.org
Mon Dec 26 17:15:51 EST 2016


You could likely use a mosfet instead of the transistor and eliminate the relay entirely... Will explore this myself.
 Steven Donegan
KK6IVC General Class FCC License
FAA PP-ASEL Pilots License
Silver State Car #86
www.sscc.us 

    On Monday, December 26, 2016 2:12 PM, Skyler F <electricity440 at gmail.com> wrote:
 

 The only good way I have found to not have to tear a Baofeng apart is the use of this circuit:
https://www.youtube.com/watch?v=QopvHGM-9_k

It takes advantage of the DC offset present in the audio connector when there is a signal. This is strongly recommended against a VOX circuit or using VOX in AllStar software because of words getting cut out and unnecessary key/unkey cycles.



On Sun, Dec 25, 2016 at 6:55 AM, Buddy Brannan <buddy at brannan.name> wrote:

We'd love to help, but you'll probably need to be more specific. Which "it" are you having trouble with? What isn't working? You'll definitely need to set up the port forwarding in your router. Also, for best results, it's possible you may still need to mod your Baofeng to get audio from the right places, COS, and so on. That's way out of my league though. So where are things alling down?

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy at brannan.name




> On Dec 25, 2016, at 12:17 AM, Eric Lessard <lessarderic29 at yahoo.com> wrote:
>
> so I have a baofeng uv5r tri power with a pi 2 and a uri! the uri acts as my digital cable  so I don't have to tear the ht  apart ! I had a couple hams program it but we got into a fight stopped talking and I need help with finalizing my NODE setup and I'm thinking I should reprogram it?? any ideas?? + I need to figure out how to port forward it??? plz help!
> ______________________________ _________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

______________________________ _________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.




-- 
Skyler Fennellamsatnet.infoKDØWHBelectricity440 at gmail.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20161226/3393e94a/attachment.html>


More information about the App_rpt-users mailing list