[App_rpt-users] Incoming echolink user timeout after twenty seconds

mike at midnighteng.com mike at midnighteng.com
Tue Feb 2 19:44:11 EST 2016


I think you would be looking for the remote activity timer because as you said is
someone keys up on radio side, the timer resets.

One or more of these settings in rpt.conf might help.

lnkactenable=0 <<<< I believe this would turn "inactivity timer" off.
remote_inact_timeout=1800 <<<<<<<<<<< 30m I think

remote_timeout=3600
lnkacttimerwarn=30

Double check those in the manual. But that's how I remember it.

...mike/kb8jnm

> On a DIAL AllStar node with EchoLink configured, an incoming Echolink
> user's transmit is interrupted after twenty seconds on every transmission.
> A local key-up resets the timer and the remote station's transmission
> resumes.  At the time of disconnect I see this in the verbose asterisk
> console output every time:
>
>     -- <DAHDI/pseudo-960886400> Playing 'rpt/node' (language 'en')
>     -- <DAHDI/pseudo-960886400> Playing 'digits/4' (language 'en')
>     -- <DAHDI/pseudo-960886400> Playing 'digits/2' (language 'en')
>     -- <DAHDI/pseudo-960886400> Playing 'digits/2' (language 'en')
>     -- <DAHDI/pseudo-960886400> Playing 'digits/6' (language 'en')
>     -- <DAHDI/pseudo-960886400> Playing 'digits/9' (language 'en')
>     -- <DAHDI/pseudo-960886400> Playing 'rpt/timeout' (language 'en')
>     -- Hungup 'DAHDI/pseudo-960886400'
>
> We've been unable to locate the setting (if there is one) that would cause
> DAHDI to play rpt/timeout.
> Where should we be looking?
>
> Thanks
>
> Larry
> HB9EYQ
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.





More information about the App_rpt-users mailing list