[App_rpt-users] Sound Possibility?

Stacy kg7qin at arrl.net
Wed Feb 10 00:37:07 EST 2016


The signatures for the chips are hard coded into the respective usb 
channel drivers.  It would take someone with knowledge of the internals 
of the chips to add support for additional fobs, since there is some 
reading and writing of specific memory locations within the usb fobs 
controllers to modify the behavior of the audio device.

To use the on-board audio, you could look at chan_alsaradio.c.

http://yo3iiu.ro/blog/?p=324



On 02/09/2016 12:07 PM, Kenneth Grimard wrote:
> yes that would seem to be a problem allstar wants to see ether a 
> cm-108 series or a cm-119 series chips
> for the audio from usb.
>
> ken n1dot
>
>
>
> On 2/9/2016 3:03 PM, Steve Zingman wrote:
>> Correct me if I'm wrong, Isn't the question about using the AC97 on 
>> board sound device in asterisk?
>> For COS and PTT, yes the LPT port can be used.
>>
>> Steve
>>
>> On 2/9/2016 12:34 PM, Kenneth Grimard wrote:
>>> I have done this using an old irlp interface take a look at this link.
>>>
>>> http://www.qsl.net/k0kn/
>>>
>>> the newest dial allstar release has parallel support in it.
>>>
>>> look at the link for converting an old irlp node to all star it has 
>>> info about the using the printer port
>>> for what you need.
>>>
>>> ken n1dot
>>>
>>>
>>>
>>> On 2/9/2016 7:22 AM, Josh W4ZZK wrote:
>>>> Again, forgive me. New to this...
>>>> I have ordered a couple of CM-108 USB FOBs for the AllStar Project. 
>>>> I am curious... with the ability to do some script editing to use a 
>>>> PC's LPT Printer Port as a "GPIO" for COR, PTT, etc., could the 
>>>> Integrated Sound Card on the Mobo (which is mostly AC97 Chips) be 
>>>> used for Audio In and Out of the Computer? Running DIAL.
>>>>
>>>> Thanks
>>>> Josh W4ZZK
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>>
>>> This email has been sent from a virus-free computer protected by Avast.
>>> www.avast.com <https://www.avast.com/sig-email>
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> This email has been sent from a virus-free computer protected by Avast.
> www.avast.com <https://www.avast.com/sig-email>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160209/bce27878/attachment.html>


More information about the App_rpt-users mailing list