[App_rpt-users] Recompile with radio relax setting

Bryan Taylor overnite at me.com
Tue Feb 16 09:33:25 EST 2016


Hello all, 

Have several nodes running on allstarlink, some x86 and some raspberry pi2's.  I have noticed the false dtmf issue on each node and would like to recompile app_rpt to set the radio relax feature accordingly to reduce/eliminate the false dtmf tones that get decoded from voice transmissions.  All nodes are running the latest dial installation, does anyone know the correct procedure to do this on a dial system?

Thanks
Bryan
Vo1mxz
Sent from my iPhone 6

> On Feb 15, 2016, at 12:34 PM, Kevin Custer <kuggie at kuggie.com> wrote:
> 
> This is now answered in the DIAL FAQ:
> 
> http://docs.allstarlink.org/drupal/node/170
> 
> Kevin
> 
> 
>> On 2/15/2016 9:54 AM, Steve Zingman wrote:
>> Jim,
>> Any node can be a "HUB" A node is not limited to one connection. There may be hardware limitation about the number of connections a given piece of hardware and internet connection can support. Typically, a HUB is located on a higher bandwidth internet connection and is running a more "stout" piece of hardware. A HUB usually does not have a node radio connected to it, but there is no reason it can't. A HUB usually runs DAHDI/pseudo for it's rxchannel.
>> 
>> As a example HUB 2100 is running on a decent internet connection and decent hardware. We are running the beta test of the DMR <---> AllStar gateway on it so it has a NW Digital DV3000 connected and is using chan_usrp instead of pseudo for it's rxchannel.
>> 
>> Hope this helps.
>> 
>> 73, Steve N4IRS 
>> 
>>> On 2/14/2016 5:24 PM, Jim Aspinwall wrote:
>>> What if anything are the specific differences between a single node (tied to simplex, repeater, Pi box and headset...) that can presumably only accept one in-bound call/connect, and a hub, to which many can connect and bridge through/over?
>>> 
>>> Given a certain amount of specialization or purpose/interest-built hubs I am interested in having a purpose-built hub for a few systems             and users not exclusive but so as not to impose on others' hubs and traffic.
>>> 
>>> What does it take to do this?
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160216/6d53e2c2/attachment.html>


More information about the App_rpt-users mailing list