[App_rpt-users] RxCTCSSfreqs / EchoLink

mike at midnighteng.com mike at midnighteng.com
Sun Feb 28 23:07:35 EST 2016


I can only refer to ACID


> Does anyone have information on ...
>
> 1) In rpt.conf, setting variable rxctcssfreqs, where is the table of
> valid RX tones?

Someone might correct me if I am wrong but "I believe" any tone is valid. You are
using the freq in hz with decimal (100.0,103.5) and it is generated/decoded in dsp.
Non-standard tones 'should' be able to be generated/decoded.



> 2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to
> the number of tones added to the list?

Perhaps someone knows but I have never seen it written as to a limit.
Not much help on that one...
Try as many as you need and see if it works.


> 3) Can the EchoLink section be configured to say ... W9YB Connected ...
> but NOT say ... to node 41111?

No, you will have the 'connected to' or nothing.
eannmode=2  ;0=no announcements, 1=node number(Allstar-xlated), 2=callsign, 3=both

http://ohnosec.org/drupal/node/107

It 'should be possible' to shut it off and make your own scripting using a
"ON-EVENT" looking for connections from a 3xxxxx node (that were not there
previously) to then speak what you want. But I have not done that myself.

http://ohnosec.org/drupal/node/176



...mike/kb8jnm



> ...STeve
> KF5VH
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.
>





More information about the App_rpt-users mailing list