[App_rpt-users] RxCTCSSfreqs / EchoLink

Jon Rorke jrorke at cogeco.ca
Mon Feb 29 15:55:44 EST 2016


rxsctcssfreqs and txctcssfreqs are defined in the usbradio.conf file not 
rpt.conf.

Jon VA3RQ

On 2/28/2016 11:07 PM, mike at midnighteng.com wrote:
> I can only refer to ACID
>
>
>> Does anyone have information on ...
>>
>> 1) In rpt.conf, setting variable rxctcssfreqs, where is the table of
>> valid RX tones?
> Someone might correct me if I am wrong but "I believe" any tone is valid. You are
> using the freq in hz with decimal (100.0,103.5) and it is generated/decoded in dsp.
> Non-standard tones 'should' be able to be generated/decoded.
>
>
>
>> 2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to
>> the number of tones added to the list?
> Perhaps someone knows but I have never seen it written as to a limit.
> Not much help on that one...
> Try as many as you need and see if it works.
>
>
>> 3) Can the EchoLink section be configured to say ... W9YB Connected ...
>> but NOT say ... to node 41111?
> No, you will have the 'connected to' or nothing.
> eannmode=2  ;0=no announcements, 1=node number(Allstar-xlated), 2=callsign, 3=both
>
> http://ohnosec.org/drupal/node/107
>
> It 'should be possible' to shut it off and make your own scripting using a
> "ON-EVENT" looking for connections from a 3xxxxx node (that were not there
> previously) to then speak what you want. But I have not done that myself.
>
> http://ohnosec.org/drupal/node/176
>
>
>
> ...mike/kb8jnm
>
>
>
>> ...STeve
>> KF5VH
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>> bottom of the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If
>> you have trouble unsubscribing, please send a message to the list detailing the
>> problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>


---
This email is free from viruses and malware because avast! Antivirus protection is active.
https://www.avast.com/antivirus




More information about the App_rpt-users mailing list