[App_rpt-users] A and B audio output from USB fob on a RPi running DIAL

Ramesh Dhami Ramesh at va3uv.com
Sun Jul 10 10:57:19 EDT 2016

Hi Kevin and Steve:

First, the Pi is running 3 full duplex nodes using DSP!

I am seeing some audio issues too, which may be a sign of pushing the limits of the Pi.

Secondly, I am using home brew fobs (StarTech CM108 conversions).

I have two 220 repeaters in my shack, I will test on the second repeater, using a different fob, which may help to pin point the issue.

I must confess that I have 3 different rev levels for my fob conversions, two of my fobs do not have a label on them, so maybe I am using one of my early fobs, where I just had one audio output!

I will test and let you know!



Sent from my iPhone

> On Jul 10, 2016, at 10:30 AM, Kevin Custer <kuggie at kuggie.com> wrote:
> Yes - I have several of these running this way.
> What are you using for your "fob".
>> On 7/10/2016 10:04 AM, Ramesh Dhami wrote:
>> Hi All:
>> I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
>> I was able to get 2 'discrete' audio outputs when running ACID on a PC.  This doesn't seem to be working with the Pi / DIAL.  Is anyone running this configuration on a Pi?

More information about the App_rpt-users mailing list