[App_rpt-users] A and B audio output from USB fob on a RPi running DIAL

Kevin Custer kuggie at kuggie.com
Sun Jul 10 16:08:19 EDT 2016


Running 3 nodes on the DIAL release is likely not going to work.  You 
may want to try Doug and David's release which uses a different channel 
driver.  I've never heard anyone having luck running more then 2 nodes 
on the Raspberry Pi release in full DSP, but I have heard of success 
with the other.

Kevin


On 7/10/2016 10:57 AM, Ramesh Dhami wrote:
> Hi Kevin and Steve:
>
> First, the Pi is running 3 full duplex nodes using DSP!
>
> I am seeing some audio issues too, which may be a sign of pushing the limits of the Pi.
>
> Secondly, I am using home brew fobs (StarTech CM108 conversions).
>
> I have two 220 repeaters in my shack, I will test on the second repeater, using a different fob, which may help to pin point the issue.
>
> I must confess that I have 3 different rev levels for my fob conversions, two of my fobs do not have a label on them, so maybe I am using one of my early fobs, where I just had one audio output!
>
> I will test and let you know!
>
> Cheers,
>
> Ramesh.
>
> Sent from my iPhone
>
>> On Jul 10, 2016, at 10:30 AM, Kevin Custer <kuggie at kuggie.com> wrote:
>>
>> Yes - I have several of these running this way.
>>
>> What are you using for your "fob".
>>
>>
>>> On 7/10/2016 10:04 AM, Ramesh Dhami wrote:
>>> Hi All:
>>>
>>> I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter.
>>>
>>> I was able to get 2 'discrete' audio outputs when running ACID on a PC.  This doesn't seem to be working with the Pi / DIAL.  Is anyone running this configuration on a Pi?
>
>




More information about the App_rpt-users mailing list