[App_rpt-users] Stepping on toes...

Steve Zingman szingman at msgstor.com
Mon Jul 11 13:33:54 EDT 2016


Yes,
I've seen it before. Ramesh asked the question here and a couple of us 
had some questions as to his configuration. I think he is in process of 
gathering info so we can trouble shoot more.
I't not hard to get lists confused.

Steve

On 7/11/2016 1:30 PM, DuaneVT . wrote:
> Thanks Steve. You have helped me several times here I believe. Perhaps 
> it was the ARM Allstar list I should have ranted to. As some posts get 
> shared between lists, it is hard not to end up on another list.
> Here is an example. I felt for the questioner...
> "Message: 3
> Date: Sun, 10 Jul 2016 09:53:39 -0400
> From: Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>>
> To: ARM Allstar <arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>>
> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the
>         DIAL Image on a RPi
> Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Ramesh,
>
>  This is NOT a dial list, ask elsewhere! It works fine on the 
> hamvoip.org <http://hamvoip.org/> code.
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
>
> > To:arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > Date: Sun, 10 Jul 2016 07:34:57 -0400
> > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image   on a RPi
> > From:arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
> > CC:Ramesh at va3uv.com <mailto:Ramesh at va3uv.com>
> >
> > Hi All:
> >
> > I am using the DIAL Image on a PRi 2; I would like to use the "A" and
> > "B" audio outputs from my fob (A for voice and B for PL), so that I can
> > inject them into separate points on my exciter.
> >
> > I was able to get 2 'discrete' audio outputs when running ACID on a PC.
> > This doesn't seem to be working with the Pi / DIAL.  Is anyone running
> > this configuration on a Pi?
> >
> > Thx,
> >
> > Ramesh.
> >
> > # 27919 and a truck load of others!
> ​"
>
> Sheesh, I want to help everyone....
> Thanks again until my next question HERE,
> Duane ​
>
> On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     Duane,
>     When were you told on the App_rpt-users list to go elsewhere with
>     DIAL questions? DIAL is the official distribution for AllStar.
>     Support questions SHOULD be posted here. I know that other lists
>     limit their support to THEIR distribution and have curtly told
>     DIAL users to go elsewhere for support. I do not remember seeing
>     your question on here. If I missed it, I'm sorry. I TRY to help
>     out with DIAL and general Asterisk questions when possible.
>
>     73, Steve N4IRS
>     INAD
>
>     On 7/11/2016 12:42 PM, DuaneVT . wrote:
>>     I too have asked questions here concerning DIAL and been told
>>     curtly to go elsewhere. As DIAL distros have all the files
>>     included and interface to the FOBs and SBCs, where do we draw the
>>     line? I have followed all instructions for installing the
>>     software and had fresh boot problems. It was hard to tell where
>>     the problem was, but when I am new to Linux/DIAL and the whole
>>     Allstar project, I looked for guidance where I found discussions.
>>     There is an Allstar Link community on Google+, and you will see I
>>     have all except 1 postings! Crickets.........
>>     Perhaps the moderator/users here could post a list of URLs for
>>     different aspects of AllStar Link so us Newbies would know where
>>     to hang out.
>>     I have had GREAT support from other listers here by direct email
>>     after each post and I sincerely thank all who have taken an
>>     interest in someone who has to learn as we all do.
>>     73,
>>     Duane  KA1LM  #42996
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>     To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160711/c54530f2/attachment.html>


More information about the App_rpt-users mailing list