[App_rpt-users] Stepping on toes...

Loren Tedford lorentedford at gmail.com
Mon Jul 11 14:02:03 EDT 2016


I suppose while we are stepping on toes I want to ask about the proper way
of securing a dial box from our wonderful hackers out their.. Been using
ufw and fail2ban but found out recently nothing is invincible.. any
thoughts?? By the way any progress on asterisk crashes?? I can't find a
reason for the crashes in the logs..

Also what is the status on updating asterisk to a more current version??
Any issues with that??

Loren Tedford (KC9ZHV)
Email: lorentedford at gmail.com
Phone:
Fax:
http://www.lorentedford.com
http://kc9zhv.com

Sent from Droid Turbo from Verizon wireless network
On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman at msgstor.com> wrote:

> Yes,
> I've seen it before. Ramesh asked the question here and a couple of us had
> some questions as to his configuration. I think he is in process of
> gathering info so we can trouble shoot more.
> I't not hard to get lists confused.
>
> Steve
>
> On 7/11/2016 1:30 PM, DuaneVT . wrote:
>
> Thanks Steve. You have helped me several times here I believe. Perhaps it
> was the ARM Allstar list I should have ranted to. As some posts get shared
> between lists, it is hard not to end up on another list.
> Here is an example. I felt for the questioner...
> "Message: 3
> Date: Sun, 10 Jul 2016 09:53:39 -0400
> From: Doug Crompton <doug at crompton.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the
>         DIAL Image on a RPi
> Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Ramesh,
>
>  This is NOT a dial list, ask elsewhere! It works fine on the hamvoip.org
>  code.
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
>
> > To: arm-allstar at hamvoip.org
> > Date: Sun, 10 Jul 2016 07:34:57 -0400
> > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL
> Image   on a RPi
> > From: arm-allstar at hamvoip.org
> > CC: Ramesh at va3uv.com
> >
> > Hi All:
> >
> > I am using the DIAL Image on a PRi 2; I would like to use the "A" and
> > "B" audio outputs from my fob (A for voice and B for PL), so that I can
> > inject them into separate points on my exciter.
> >
> > I was able to get 2 'discrete' audio outputs when running ACID on a PC.
> > This doesn't seem to be working with the Pi / DIAL.  Is anyone running
> > this configuration on a Pi?
> >
> > Thx,
> >
> > Ramesh.
> >
> > # 27919 and a truck load of others!
> ​"
>
> Sheesh, I want to help everyone....
> Thanks again until my next question HERE,
> Duane ​
>
> On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> Duane,
>> When were you told on the App_rpt-users list to go elsewhere with DIAL
>> questions? DIAL is the official distribution for AllStar. Support questions
>> SHOULD be posted here. I know that other lists limit their support to THEIR
>> distribution and have curtly told DIAL users to go elsewhere for support. I
>> do not remember seeing your question on here. If I missed it, I'm sorry. I
>> TRY to help out with DIAL and general Asterisk questions when possible.
>>
>> 73, Steve N4IRS
>> INAD
>>
>> On 7/11/2016 12:42 PM, DuaneVT . wrote:
>>
>> I too have asked questions here concerning DIAL and been told curtly to
>> go elsewhere. As DIAL distros have all the files included and interface to
>> the FOBs and SBCs, where do we draw the line? I have followed all
>> instructions for installing the software and had fresh boot problems. It
>> was hard to tell where the problem was, but when I am new to Linux/DIAL and
>> the whole Allstar project, I looked for guidance where I found discussions.
>> There is an Allstar Link community on Google+, and you will see I have all
>> except 1 postings! Crickets.........
>> Perhaps the moderator/users here could post a list of URLs for different
>> aspects of AllStar Link so us Newbies would know where to hang out.
>> I have had GREAT support from other listers here by direct email after
>> each post and I sincerely thank all who have taken an interest in someone
>> who has to learn as we all do.
>> 73,
>> Duane  KA1LM  #42996
>>
>>
>> _______________________________________________
>> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160711/ee098892/attachment.html>


More information about the App_rpt-users mailing list