[App_rpt-users] Stepping on toes...

Steve Zingman szingman at msgstor.com
Mon Jul 11 14:05:14 EDT 2016


It's going to taker a LOT of work to change versions of Asterisk. That's 
not to say it will not happen.
I can't re-create you crashes.
I firewall my boxes to only allow access from trusted addresses for ssh. 
I use a VPN for roaming users. I don't support SIP.

On 7/11/2016 2:02 PM, Loren Tedford wrote:
>
> I suppose while we are stepping on toes I want to ask about the proper 
> way of securing a dial box from our wonderful hackers out their.. Been 
> using ufw and fail2ban but found out recently nothing is invincible.. 
> any thoughts?? By the way any progress on asterisk crashes?? I can't 
> find a reason for the crashes in the logs..
>
> Also what is the status on updating asterisk to a more current 
> version?? Any issues with that??
>
> Loren Tedford (KC9ZHV)
> Email: lorentedford at gmail.com <mailto:lorentedford at gmail.com>
> Phone:
> Fax:
> http://www.lorentedford.com
> http://kc9zhv.com
>
> Sent from Droid Turbo from Verizon wireless network
>
> On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     Yes,
>     I've seen it before. Ramesh asked the question here and a couple
>     of us had some questions as to his configuration. I think he is in
>     process of gathering info so we can trouble shoot more.
>     I't not hard to get lists confused.
>
>     Steve
>
>     On 7/11/2016 1:30 PM, DuaneVT . wrote:
>>     Thanks Steve. You have helped me several times here I believe.
>>     Perhaps it was the ARM Allstar list I should have ranted to. As
>>     some posts get shared between lists, it is hard not to end up on
>>     another list.
>>     Here is an example. I felt for the questioner...
>>     "Message: 3
>>     Date: Sun, 10 Jul 2016 09:53:39 -0400
>>     From: Doug Crompton <doug at crompton.com <mailto:doug at crompton.com>>
>>     To: ARM Allstar <arm-allstar at hamvoip.org
>>     <mailto:arm-allstar at hamvoip.org>>
>>     Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the
>>             DIAL Image on a RPi
>>     Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0 at phx.gbl>
>>     Content-Type: text/plain; charset="iso-8859-1"
>>
>>     Ramesh,
>>
>>      This is NOT a dial list, ask elsewhere! It works fine on the
>>     hamvoip.org <http://hamvoip.org/> code.
>>     73 Doug
>>     WA3DSP
>>     http://www.crompton.com/hamradio
>>
>>
>>     > To:arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>     > Date: Sun, 10 Jul 2016 07:34:57 -0400
>>     > Subject: [arm-allstar] Using "A" and "B" audio outputs using the DIAL Image  on a RPi
>>     > From:arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>     > CC:Ramesh at va3uv.com <mailto:Ramesh at va3uv.com>
>>     >
>>     > Hi All:
>>     >
>>     > I am using the DIAL Image on a PRi 2; I would like to use the "A" and
>>     > "B" audio outputs from my fob (A for voice and B for PL), so that I can
>>     > inject them into separate points on my exciter.
>>     >
>>     > I was able to get 2 'discrete' audio outputs when running ACID on a PC.
>>     > This doesn't seem to be working with the Pi / DIAL.  Is anyone running
>>     > this configuration on a Pi?
>>     >
>>     > Thx,
>>     >
>>     > Ramesh.
>>     >
>>     > # 27919 and a truck load of others!
>>     ​"
>>
>>     Sheesh, I want to help everyone....
>>     Thanks again until my next question HERE,
>>     Duane ​
>>
>>     On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman
>>     <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>>         Duane,
>>         When were you told on the App_rpt-users list to go elsewhere
>>         with DIAL questions? DIAL is the official distribution for
>>         AllStar. Support questions SHOULD be posted here. I know that
>>         other lists limit their support to THEIR distribution and
>>         have curtly told DIAL users to go elsewhere for support. I do
>>         not remember seeing your question on here. If I missed it,
>>         I'm sorry. I TRY to help out with DIAL and general Asterisk
>>         questions when possible.
>>
>>         73, Steve N4IRS
>>         INAD
>>
>>         On 7/11/2016 12:42 PM, DuaneVT . wrote:
>>>         I too have asked questions here concerning DIAL and been
>>>         told curtly to go elsewhere. As DIAL distros have all the
>>>         files included and interface to the FOBs and SBCs, where do
>>>         we draw the line? I have followed all instructions for
>>>         installing the software and had fresh boot problems. It was
>>>         hard to tell where the problem was, but when I am new to
>>>         Linux/DIAL and the whole Allstar project, I looked for
>>>         guidance where I found discussions. There is an Allstar Link
>>>         community on Google+, and you will see I have all except 1
>>>         postings! Crickets.........
>>>         Perhaps the moderator/users here could post a list of URLs
>>>         for different aspects of AllStar Link so us Newbies would
>>>         know where to hang out.
>>>         I have had GREAT support from other listers here by direct
>>>         email after each post and I sincerely thank all who have
>>>         taken an interest in someone who has to learn as we all do.
>>>         73,
>>>         Duane  KA1LM  #42996
>>>
>>>
>>>         _______________________________________________
>>>         App_rpt-users mailing list
>>>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>         To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>         You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>         -- 
>>         "Anything is possible if you don't know what you are talking about."
>>         1st Law of Logic
>>
>>
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160711/dff130fb/attachment.html>


More information about the App_rpt-users mailing list