[App_rpt-users] Stepping on toes...

Steve Zingman szingman at msgstor.com
Mon Jul 11 14:12:47 EDT 2016


Time, Energy, drive, people. Just to name a few.

On 7/11/2016 2:08 PM, Loren Tedford wrote:
> Ok so what are missing to get the development started on a more 
> current version of asterisk?? Lets face it 1.4.23 went out of 
> professional service back in like 2010...
>
> Just saying we really need to start thinking more about the future now 
> rather than waiting till we have mass issues across the board..
>
> Loren Tedford (KC9ZHV)
> Phone:
> Fax:
> Email: lorentedford at gmail.com <mailto:lorentedford at gmail.com>
> Email: KC9ZHV at KC9ZHV.com <mailto:KC9ZHV at KC9ZHV.com>
> http://www.lorentedford.com <http://www.lorentedford.com/>
> http://www.kc9zhv.com <http://www.kc9zhv.com/>
> http://forum.kc9zhv.com <http://forum.kc9zhv.com/>
> http://hub.kc9zhv.com <http://hub.kc9zhv.com/>
> http://Ltcraft.net<http://ltcraft.net/>
>
> On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman <szingman at msgstor.com 
> <mailto:szingman at msgstor.com>> wrote:
>
>     It's going to taker a LOT of work to change versions of Asterisk.
>     That's not to say it will not happen.
>     I can't re-create you crashes.
>     I firewall my boxes to only allow access from trusted addresses
>     for ssh. I use a VPN for roaming users. I don't support SIP.
>
>
>     On 7/11/2016 2:02 PM, Loren Tedford wrote:
>>
>>     I suppose while we are stepping on toes I want to ask about the
>>     proper way of securing a dial box from our wonderful hackers out
>>     their.. Been using ufw and fail2ban but found out recently
>>     nothing is invincible.. any thoughts?? By the way any progress on
>>     asterisk crashes?? I can't find a reason for the crashes in the
>>     logs..
>>
>>     Also what is the status on updating asterisk to a more current
>>     version?? Any issues with that??
>>
>>     Loren Tedford (KC9ZHV)
>>     Email: lorentedford at gmail.com <mailto:lorentedford at gmail.com>
>>     Phone:
>>     Fax:
>>     http://www.lorentedford.com
>>     http://kc9zhv.com
>>
>>     Sent from Droid Turbo from Verizon wireless network
>>
>>     On Jul 11, 2016 12:34 PM, "Steve Zingman" <szingman at msgstor.com
>>     <mailto:szingman at msgstor.com>> wrote:
>>
>>         Yes,
>>         I've seen it before. Ramesh asked the question here and a
>>         couple of us had some questions as to his configuration. I
>>         think he is in process of gathering info so we can trouble
>>         shoot more.
>>         I't not hard to get lists confused.
>>
>>         Steve
>>
>>         On 7/11/2016 1:30 PM, DuaneVT . wrote:
>>>         Thanks Steve. You have helped me several times here I
>>>         believe. Perhaps it was the ARM Allstar list I should have
>>>         ranted to. As some posts get shared between lists, it is
>>>         hard not to end up on another list.
>>>         Here is an example. I felt for the questioner...
>>>         "Message: 3
>>>         Date: Sun, 10 Jul 2016 09:53:39 -0400
>>>         From: Doug Crompton <doug at crompton.com
>>>         <mailto:doug at crompton.com>>
>>>         To: ARM Allstar <arm-allstar at hamvoip.org
>>>         <mailto:arm-allstar at hamvoip.org>>
>>>         Subject: Re: [arm-allstar] Using "A" and "B" audio outputs
>>>         using the
>>>         DIAL Image on a RPi
>>>         Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0 at phx.gbl>
>>>         Content-Type: text/plain; charset="iso-8859-1"
>>>
>>>         Ramesh,
>>>
>>>          This is NOT a dial list, ask elsewhere! It works fine on
>>>         the hamvoip.org <http://hamvoip.org/> code.
>>>         73 Doug
>>>         WA3DSP
>>>         http://www.crompton.com/hamradio
>>>
>>>
>>>         > To:arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>>         > Date: Sun, 10 Jul 2016 07:34:57 -0400
>>>         > Subject: [arm-allstar] Using "A" and "B" audio outputs
>>>         using the DIAL Image   on a RPi
>>>         > From:arm-allstar at hamvoip.org <mailto:arm-allstar at hamvoip.org>
>>>         > CC:Ramesh at va3uv.com <mailto:Ramesh at va3uv.com>
>>>         >
>>>         > Hi All:
>>>         >
>>>         > I am using the DIAL Image on a PRi 2; I would like to use the
>>>         "A" and
>>>         > "B" audio outputs from my fob (A for voice and B for PL), so
>>>         that I can
>>>         > inject them into separate points on my exciter.
>>>         >
>>>         > I was able to get 2 'discrete' audio outputs when running ACID on
>>>         a PC.
>>>         > This doesn't seem to be working with the Pi / DIAL.  Is anyone
>>>         running
>>>         > this configuration on a Pi?
>>>         >
>>>         > Thx,
>>>         >
>>>         > Ramesh.
>>>         >
>>>         > # 27919 and a truck load of others!
>>>         ​"
>>>
>>>         Sheesh, I want to help everyone....
>>>         Thanks again until my next question HERE,
>>>         Duane ​
>>>
>>>         On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman
>>>         <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>
>>>             Duane,
>>>             When were you told on the App_rpt-users list to go
>>>             elsewhere with DIAL questions? DIAL is the official
>>>             distribution for AllStar. Support questions SHOULD be
>>>             posted here. I know that other lists limit their support
>>>             to THEIR distribution and have curtly told DIAL users to
>>>             go elsewhere for support. I do not remember seeing your
>>>             question on here. If I missed it, I'm sorry. I TRY to
>>>             help out with DIAL and general Asterisk questions when
>>>             possible.
>>>
>>>             73, Steve N4IRS
>>>             INAD
>>>
>>>             On 7/11/2016 12:42 PM, DuaneVT . wrote:
>>>>             I too have asked questions here concerning DIAL and
>>>>             been told curtly to go elsewhere. As DIAL distros have
>>>>             all the files included and interface to the FOBs and
>>>>             SBCs, where do we draw the line? I have followed all
>>>>             instructions for installing the software and had fresh
>>>>             boot problems. It was hard to tell where the problem
>>>>             was, but when I am new to Linux/DIAL and the whole
>>>>             Allstar project, I looked for guidance where I found
>>>>             discussions. There is an Allstar Link community on
>>>>             Google+, and you will see I have all except 1 postings!
>>>>             Crickets.........
>>>>             Perhaps the moderator/users here could post a list of
>>>>             URLs for different aspects of AllStar Link so us
>>>>             Newbies would know where to hang out.
>>>>             I have had GREAT support from other listers here by
>>>>             direct email after each post and I sincerely thank all
>>>>             who have taken an interest in someone who has to learn
>>>>             as we all do.
>>>>             73,
>>>>             Duane  KA1LM  #42996
>>>>
>>>>
>>>>             _______________________________________________
>>>>             App_rpt-users mailing list
>>>>             App_rpt-users at ohnosec.org
>>>>             <mailto:App_rpt-users at ohnosec.org>
>>>>             http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>             To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>             You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>>             -- 
>>>             "Anything is possible if you don't know what you are talking about."
>>>             1st Law of Logic
>>>
>>>
>>
>>         -- 
>>         "Anything is possible if you don't know what you are talking about."
>>         1st Law of Logic
>>
>>
>>         _______________________________________________
>>         App_rpt-users mailing list
>>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>         To unsubscribe from this list please visit
>>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>         scroll down to the bottom of the page. Enter your email
>>         address and press the "Unsubscribe or edit options button"
>>         You do not need a password to unsubscribe, you can do it via
>>         email confirmation. If you have trouble unsubscribing, please
>>         send a message to the list detailing the problem.
>>
>
>     -- 
>     "Anything is possible if you don't know what you are talking about."
>     1st Law of Logic
>
>

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160711/1af7c1c1/attachment.html>


More information about the App_rpt-users mailing list