[App_rpt-users] 2 nodes under the same IP

Skyler F electricity440 at gmail.com
Wed Jul 13 23:09:28 EDT 2016


Thanks, the nodes stanza trick worked. I forgot you could do that with
normal nodes as well as private.

On Wed, Jul 13, 2016 at 7:44 PM, Philip Dorr <kd0ixy at judgementgaming.com>
wrote:

> You may need to setup hairpin NAT.
> http://wiki.mikrotik.com/wiki/Hairpin_NAT
>
> On Wed, Jul 13, 2016 at 8:35 PM, Skyler F <electricity440 at gmail.com>
> wrote:
>
>> I have two separate boxes, one node on port 4570 and the other on 4569.
>> They can both take inbound and outbound calls, however, they can't connect
>> to each other. I don't know if it is the mikrotik router, or the way
>> Mountain BB is configured, but a loopback call can not be made.
>>
>> Is there any solution to fix this without assigning private nodes?
>>
>> 73
>> Skyler
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>


-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160713/204da9d7/attachment.html>


More information about the App_rpt-users mailing list