[App_rpt-users] 2 nodes under the same IP

Mike - W5JR w5jr.lists at gmail.com
Wed Jul 13 23:55:27 EDT 2016


Not just "could" but in fact "have to" when two (or more) nodes (private or public) are on the same public IP. 

This is also the way to get private nodes on different public IPs connectable to each other. You have to enter the public IP instead of the router NAT IP. 

tnx
Mike / W5JR
Alpharetta GA

> On Jul 13, 2016, at 10:09 PM, Skyler F <electricity440 at gmail.com> wrote:
> 
> Thanks, the nodes stanza trick worked. I forgot you could do that with normal nodes as well as private.
> 
>> On Wed, Jul 13, 2016 at 7:44 PM, Philip Dorr <kd0ixy at judgementgaming.com> wrote:
>> You may need to setup hairpin NAT.  http://wiki.mikrotik.com/wiki/Hairpin_NAT
>> 
>>> On Wed, Jul 13, 2016 at 8:35 PM, Skyler F <electricity440 at gmail.com> wrote:
>>> I have two separate boxes, one node on port 4570 and the other on 4569. They can both take inbound and outbound calls, however, they can't connect to each other. I don't know if it is the mikrotik router, or the way Mountain BB is configured, but a loopback call can not be made. 
>>> 
>>> Is there any solution to fix this without assigning private nodes? 
>>> 
>>> 73
>>> Skyler 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> -- 
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160713/b4a72f3c/attachment.html>


More information about the App_rpt-users mailing list