[App_rpt-users] Iax2 not registering on a 2 node system

Shuler Burton shulerburton at gmail.com
Fri Jul 15 00:56:27 EDT 2016

Could put one in the Dmz but that's not best practice security wise. Can only forward 1 port so this would work.  Make sure to have iptables or another firewall setup and working properly.  Temporarily this would work.  I run a. Vm acid test on my PC with echo link so can have one or the other typically but not both..  The UDP is more of a session than port... Think of it as this session uses these 2 ports.  

Sent from my iPhone

Shuler Burton

God bless you:
 השם יברך אותך --
 Hashem yevarech otcha 

> On Jul 14, 2016, at 9:35 PM, Skyler F <electricity440 at gmail.com> wrote:
> I have 2 nodes under the same IP, and I am having trouble registering iax on both of them, its either or, whichever one starts asterisk first. I have properly configured the port in the iax.conf file, the rpt.conf file, and the allstar portal, but I am not able get both nodes registered with AllStar. 
> This problem only started happening when I configured inbound ports, 4570 UDP to one node and 4569 UDP to the other. If I turn off port forwarding, everything is fine. 
> One node is fine, but the other is having issues
> Host                  dnsmgr  Username    Perceived             Refresh  State
>   Y       40764       <Unregistered>             60  Request Sent
>   Y       42622       <Unregistered>             60  Request Sent
> Host                  dnsmgr  Username    Perceived             Refresh  State
>   Y       42845            60  Registered
> -- 
> Skyler Fennell
> amsatnet.info
> electricity440 at gmail.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160715/5a76cf7e/attachment.html>

More information about the App_rpt-users mailing list