[App_rpt-users] trouble connecting

George Csahanin george at dyb.com
Sat Jul 16 11:13:20 EDT 2016


Can't leave well enough alone.


OK, downloaded the config from allstar to my box, asterisk runs, doesn't 
talk to the radio...


Arrrrrrrghh!


GeorgeC


On 7/16/2016 10:28 AM, David McGough wrote:
> Hi George,
>
> The most recent rpt_extnode lists still show you using port 4569.
>
> If you've switch the asterisk software and router at your end to 4570 (or
> something else), you need to also change the port used in the web portal
> (https://allstarlink.org/ ).
>
> 73, David KB4FXC
>
>
>
> On Sat, 16 Jul 2016, George Csahanin wrote:
>
>> Still some nodes that show online that I cannot connect to but I may
>> have messed up something with the node list download in my hacking. The
>> one I have been able to connect to has an entry in rpt.conf. But at
>> least that connection is up, and it is the normal config.
>>
>>
>> Thanks
>>
>>
>> GeorgeC
>>
>>
>> On 7/16/2016 10:04 AM, Steve Zingman wrote:
>>> Great.
>>> Glad you are up and running.
>>>
>>> 73, Steve N4IRS
>>>
>>> On 07/16/2016 10:02 AM, George Csahanin wrote:
>>>> Steve, I just started poking in the router and saw that Verizon has
>>>> services on port 4567, and took a wild guess that they may be
>>>> blocking some stuff. Moved my node to 4570 and it all works. Just
>>>> about 5 minutes ago.
>>>>
>>>>
>>>> Go figure.
>>>>
>>>>
>>>> GeorgeC
>>>>
>>>>
>>>> On 7/16/2016 9:52 AM, Steve Zingman wrote:
>>>>> George,
>>>>> What is the result of the Asterisk CLI command: iax2 show registry
>>>>>
>>>>> Lets start there
>>>>>
>>>>> On 07/16/2016 09:48 AM, George Csahanin wrote:
>>>>>> Stumped, maybe because I've played with this stuff a lot over the
>>>>>> last 7 years...but...my ISP just changed my IP address. No longer
>>>>>> can connect to anything and the last extnodes file was right before
>>>>>> they made the change Thursday night. Might have been Wednesday,
>>>>>> doesn't matter. There was nothing to change in the rpt.conf file,
>>>>>> everything looks normal except the only obvious thing is that I'm
>>>>>> not seeing rpt_extnodes updating. I put an entry in rpt.conf for a
>>>>>> node I normally connect to (27891) and get /__auto_congest:
>>>>>> Auto-congesting call due to slow response//
>>>>>> /Checked port forwarding rules on the Verizon router, and is
>>>>>> normal. I also *can* connect to usual nodes via the echolink
>>>>>> port./(W8VT is 27849 and 606945 echo. echo works)
>>>>>>
>>>>>> /Really stumped but operating under a medically induced handicap
>>>>>> (fever). Anybody have any words of wisdom as to what I may be
>>>>>> overlooking. Worked fine until Verizon re-did everything that night. /
>>>>>>
>>>>>> /Again, thanks for bearing with me but this bug has me down and
>>>>>> this isn't looking too clear to me.
>>>>>>
>>>>>> GeorgeC
>>>>>> W2DB
>>>>>> 2360/
>>>>>>
>>>>>> /
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>> -- 
>>>>> "Anything is possible if you don't know what you are talking about."
>>>>> 1st Law of Logic
>>> -- 
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>
>




More information about the App_rpt-users mailing list