[App_rpt-users] Shared repeater tone panel

Bob Pyke k6ecm1 at gmail.com
Fri Jul 22 13:06:47 EDT 2016


Sounds like you want the repeater to open for any, or a subset of PL tones, the broadcast the received tone. If you get it to work, what do you expect to happen when multiple folks use the repeater at once? They won't hear each other unless two are using it at once. There Is still only one audio path through the repeater.

Thanks,
k6ecm
73
Sent from my iPhone

> On Jul 22, 2016, at 8:29 AM, Joe Moskalski <kc2irv at gmail.com> wrote:
> 
> I have a need to setup a community repeater. This is done easily with a shared repeater tone panel and the like from CSI. I was wondering if this could be accomplished using app_rpt. All it would need to do is allow the use of multiple input and output PL tones. Simply put, when the repeater receives X pl tone it transmits the X pl tone on the output and when the repeater receives Y pl tone it transmits the Y pl tone on the output. 
> If anyone has done this or has any idea on how this would be accomplished it would be much appreciated.
> Thanks in advance! 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



More information about the App_rpt-users mailing list