[App_rpt-users] Shared repeater tone panel

Joe Moskalski kc2irv at gmail.com
Fri Jul 22 13:21:26 EDT 2016


Yes, I understand this. this isn't going to be a ham repeater where people
are yaking for 5 minutes at a time. Its going to be for a GMRS system.
Community repeaters were a pretty common thing with using multiple tones
for different customers on a commercial system. Its basicly the same as
having multiple talk groups on the same DMR time slot. Since I now know
this is easily done, I just need to find the information on how to do it. I
know the comments in usbradio.conf refer to a tone table, I just need to
find out what/where that is and how it is implemented.

On Fri, Jul 22, 2016 at 1:06 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:

> Sounds like you want the repeater to open for any, or a subset of PL
> tones, the broadcast the received tone. If you get it to work, what do you
> expect to happen when multiple folks use the repeater at once? They won't
> hear each other unless two are using it at once. There Is still only one
> audio path through the repeater.
>
> Thanks,
> k6ecm
> 73
> Sent from my iPhone
>
> > On Jul 22, 2016, at 8:29 AM, Joe Moskalski <kc2irv at gmail.com> wrote:
> >
> > I have a need to setup a community repeater. This is done easily with a
> shared repeater tone panel and the like from CSI. I was wondering if this
> could be accomplished using app_rpt. All it would need to do is allow the
> use of multiple input and output PL tones. Simply put, when the repeater
> receives X pl tone it transmits the X pl tone on the output and when the
> repeater receives Y pl tone it transmits the Y pl tone on the output.
> > If anyone has done this or has any idea on how this would be
> accomplished it would be much appreciated.
> > Thanks in advance!
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160722/e231e929/attachment.html>


More information about the App_rpt-users mailing list