[App_rpt-users] Macro handling

Stephen - K1LNX k1lnx at k1lnx.net
Tue Jul 26 16:41:11 EDT 2016


Ahh.... ok... that makes sense now, wasn't so obvious to me lol... I'll
give it a shot... thanks!


On Tue, Jul 26, 2016 at 4:37 PM, Steve Agee <n5zua at earthlink.net> wrote:

> No, it wont, because once it reads 423 it can execute it, and so it does
> and stops reading in digits. So, it will never reach 4231. What would work
> is if you changed 423 to 4230 or 4232.
>
> N5ZUA
>
>
> On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
>
> Will macros take more than two digits? I am starting to play around with
> them (and admittedly not a ton of experience), but I can't get the
> following to work for whatever reason:
>
> [2376]
> macro = macro
>
> [functions]
> ; Macro Commands
> 423 = macro,1
> 4231 = macro,2
>
> [macro]
> ; connect to NETDA Hub 28741
> 1 = *328741#
> 2 = *128741#
>
> Does this look right and should it work? I did restart Asterisk/did an rpt
> reload etc, but no change. If I dial (or send from the CLI) *423, I expect
> it to connect to my hub nobe, *4231 to disconnect, but it does not work.
>
> 73
> Stephen
> K1LNX
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160726/974e0972/attachment.html>


More information about the App_rpt-users mailing list