[App_rpt-users] Macro handling

Bob Poff wb3awj at comcast.net
Thu Jul 28 01:00:12 EDT 2016


In the functions stanza you define the lead in digit. (423 in this case).

In the macro stanza the trailing digits (1 in this case) for each individual macro.

Executing macro 1 would be *4231.
Exccuting macro 2 would be *4232.

Your line :
4231 = macro,2
Should be removed.

If your dial plan allows, I would use a single digit lead in (4). Then three digit trailing digits (i.e. 200-299).

So something like this:
[functions]
; Macro Commands
4 = macro,1     ; Call a macro

[macro]
; connect to NETDA Hub 28741
231 = *328741#    ; Connect
232 = *128741#    ; Disconnect 

Robert A. Poff
Loganville, Pa




-------- Original Message --------
From: Stephen - K1LNX <k1lnx at k1lnx.net>
Sent: Tue Jul 26 16:58:29 EDT 2016
To: app_rpt mailing list <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Macro handling

Still no joy on this... changed 423 to 4230 and did not work.

Am I misunderstanding how this is supposed to work perhaps?

Stephen
K1LNX

On Tuesday, July 26, 2016, Stephen - K1LNX <k1lnx at k1lnx.net> wrote:

> Ahh.... ok... that makes sense now, wasn't so obvious to me lol... I'll
> give it a shot... thanks!
>
>
> On Tue, Jul 26, 2016 at 4:37 PM, Steve Agee <n5zua at earthlink.net
> <javascript:_e(%7B%7D,'cvml','n5zua at earthlink.net');>> wrote:
>
>> No, it wont, because once it reads 423 it can execute it, and so it does
>> and stops reading in digits. So, it will never reach 4231. What would work
>> is if you changed 423 to 4230 or 4232.
>>
>> N5ZUA
>>
>>
>> On 7/26/2016 3:27 PM, Stephen - K1LNX wrote:
>>
>> Will macros take more than two digits? I am starting to play around with
>> them (and admittedly not a ton of experience), but I can't get the
>> following to work for whatever reason:
>>
>> [2376]
>> macro = macro
>>
>> [functions]
>> ; Macro Commands
>> 423 = macro,1
>> 4231 = macro,2
>>
>> [macro]
>> ; connect to NETDA Hub 28741
>> 1 = *328741#
>> 2 = *128741#
>>
>> Does this look right and should it work? I did restart Asterisk/did an
>> rpt reload etc, but no change. If I dial (or send from the CLI) *423, I
>> expect it to connect to my hub nobe, *4231 to disconnect, but it does not
>> work.
>>
>> 73
>> Stephen
>> K1LNX
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing listApp_rpt-users at ohnosec.org <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>


------------------------------------------------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160728/e22ed3ca/attachment.html>


More information about the App_rpt-users mailing list