[App_rpt-users] Two Node Server Lost CT

mike at midnighteng.com mike at midnighteng.com
Wed Mar 9 11:58:04 EST 2016



See Also (in rpt.conf for each node)

unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8
nolocallinkct=1


...mike/kb8jnm



> Good Morning!   I have a two node ACID AllStar Server.  Until today the
> telemetry and wait-times were common for both nodes.  Today I change the
> lines for the first node to read, and lost the custom ct2 and ct8 tone ...
>
> telemetry=telemetry42316
> wait_times=wait-times42316
>
> I copied the common stanzas and added the node number to form (the
> second node handled in a like manner)...
>
> [telemetry42316]
> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> ;ct2=|t(660,880,150,2048)  ;Orig Tone
> ct2=|t(2450,0,125,1024)  ;Repeater Not Linked ;NASA Beep Tone
> ct3=|t(440,0,150,4096)   ;Repeater Linked  ;Low Tone
> ct4=|t(550,0,150,2048)
> ct5=|t(660,0,150,2048)
> ct6=|t(880,0,150,2048)
> ct7=|t(660,440,150,2048)
> ;ct8=|t(700,1100,150,2048)  ;Orig Tone  ; ct for LINKED UNKEY
> ct8=|t(262,330,150,2048)(784,330,150,2048)  ;Harmony  ; ct for LINKED UNKEY
> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> remotemon=|t(1209,0,50,2048)
> cmdmode=|t(900,903,200,2048)
> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> patchup=rpt/callproceeding
> patchdown=rpt/callterminated
> ;
> ; This section allows wait times for telemetry events to be adjusted
> ; A section for wait times can be defined for every repeater
> ;
> [wait-times42316]
> telemwait=1750                        ; Telemetry wait set to 1.75 seconds
> idwait=500                            ; ID wait set to 0.5 seconds
> unkeywait=1000                        ; Unkey wait set to 1.0 seconds
> calltermwait=1500                     ; Call termination wait set to 1.5
> seconds
>
> It feels like I have gone back to the default CT tones in app_rpt. Has
> anyone done this successfully?
>
> ...STeve - KF5VH
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.





More information about the App_rpt-users mailing list