[App_rpt-users] ACID Error Lockup

kk6ecm kk6ecm at gmail.com
Fri Mar 18 10:06:44 EDT 2016


Same experience with my last ACID build on a mini-ITX. Installed DIAL, which was a bit more forgiving. Troubleshooting revealed the USB hardware was degrading. Discovered stability returned after moving the nodes to two separate hubs on the motherboard. Having put the repeater back online with an interim RPi 2 using DIAL I decided not to use the Mini-ITX any more, after receiving complements on the audio quality with the RPi 2. Easy decision :-)


Thanks,
Bob
kk6ecm
73

Sent from iPad


> On Mar 18, 2016, at 6:01 AM, Steve Mahler <kizzy at lusfiber.net> wrote:
> 
> I have an ACID distribution running.  Last night I ran an "astres.sh" after minor change to the rpt.conf file, and everything went away.  No radio, no internet, just dead.  Details below.  Has anyone dealt with this?  {This is a Dell PC and an URI.}
> 
> I went to the repeater site and found the monitor filled with
> "cannot submit datapipe for urb 0, error -22: internal error"
> 
> The last line was partially truncated.  The keyboard was dead. Pressing the power button did not start a shutdown.  Finally holding the power button down to dump the power and then restarting the machine brought things back to life.  Any information appreciated.
> 
> ...STeve - KF5VH
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



More information about the App_rpt-users mailing list