[App_rpt-users] ACID Error Lockup

mike at midnighteng.com mike at midnighteng.com
Fri Mar 18 10:18:28 EDT 2016

If you have updated system files, you might want to re-compile.

You might also want to turn off all built-in devices not in use in the bios set-up.
(parallel,serial, sound, some usb hubs etc)
IRQ / PNP issues. And force a update to the PNP data when done if not automatic.

Process of elimination in the end.


> I have an ACID distribution running.  Last night I ran an "astres.sh"
> after minor change to the rpt.conf file, and everything went away.  No
> radio, no internet, just dead.  Details below.  Has anyone dealt with
> this?  {This is a Dell PC and an URI.}
> I went to the repeater site and found the monitor filled with
> "cannot submit datapipe for urb 0, error -22: internal error"
> The last line was partially truncated.  The keyboard was dead. Pressing
> the power button did not start a shutdown.  Finally holding the power
> button down to dump the power and then restarting the machine brought
> things back to life.  Any information appreciated.
> ...STeve - KF5VH
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.

More information about the App_rpt-users mailing list