[App_rpt-users] Hamtronics receiver issue with AllStar RTCM
Kirk Just Kirk
wb6egr at gmail.com
Sun Mar 27 19:05:08 EDT 2016
Honestly.....With $25 Maxtracs all over the place.......why.....WHY would
you want to screw around with anything Hamtronics makes....seriously.....
On Sun, Mar 27, 2016 at 3:23 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> Try adding JP1 in the RTCM. This gives some gain to the squelch noise amp.
> If that works you'll want to turn on the RTCM's BEW (#17 on the main
> menu). If it's not on that menu you'll need to download the proper firmware
> and upgrade. This help radios with low out of band discriminator noise not
> false the squelch on voice peaks. There 3 settings 0) off, 1) on, and 3) on
> with more aggressive locking.
> But first make sure you can calibrate the squelch with JP1 in. Otherwise
> your SOL and there's no reason to upgrade. In that case you'll have to buy
> some other radios for your voters.
> On Sun, Mar 27, 2016 at 2:12 PM, Skyler F <electricity440 at gmail.com>
>> For a voter project, we got the hamtronics VHF receiver pretuned to the
>> repeaters input frequency. The idea is to use hamtronics receivers for
>> every voted receive site for equivalent audio characteristics.
>> When hooked up to the discriminator on the hamtronics board, I could not
>> get the RTCM to calibrate squelch. It usually told me the audio was too low
>> weather the RX level was bumped up or down. I then hooked it up to a
>> motorola SM50 and it calibrated shortly after adjusting RX levels.
>> So... I hooked a cheap sound card up to audacity, and took a look at the
>> spectrum of each receiver. The hamtronics obviously looks like it lacks
>> high frequency noise on the discriminator output.
>> Here is the SM50 discriminator out:
>> Here is the hamtronics discriminator out:
>> Here is an audio sample comparing them (you can probably guess which
>> radio is first):
>> Does anybody else have experience with hamtronics receivers?
>> Skyler KD0WHB
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users