[App_rpt-users] Non-RTCM voter, where?
kg6uyz at gmail.com
Wed Mar 30 11:25:58 EDT 2016
If you looking for the alternative IP voting of the varuious app_rpt
flavors you can try XIPAR: http://www.xelatec.com/xipar/simplevoter
It wont be as seamless of voting as a RTCM, but its much simpler, doesnt
require anything more then PC's, the IP backhaul and usb radio interfaces
with radios capable of giving discriminator audio.
Conventional hardware voting comparators could work but require the
backhaul, which in most commercial applications is 4 wire e&m voice
circuits using either tone signaling or e&m signaling. (This method of
voting is done outside of allstar/app_rpt.)
On Wed, Mar 30, 2016 at 8:09 AM, Joe Leikhim <rhyolite at leikhim.com> wrote:
> Here are some products to start with;
> There is the Raven M4x
> Raytheon JPS SNV-12 (Though the future of this product is up in the air,
> it was the defacto standard. Uses 600 ohm VF circuits, IP connectivity
> needs to be overlaid)
> Motorola Spectra Tac (Obsolete Now Motorola has pretty much abandoned
> analog FM technology. Uses 600 ohm VF circuits,)
> The above voters all use some method of signal/noise voting. The JPS
> SNV-12 and the Raven M4X use DSP to make decision, while the Spectra Tac
> was pretty much an analog noise measurement vs a status tone/audio AGC
> level. The SpectraTac does not support non-Motorola receivers unless you
> know the "secret sauce" which I am privy to.
> This site has some practical examples of projects that are simulcast, but
> by design incorporate the SNV-12 voters.
> Are you looking for some more in depth RF design aspects of receiver
> voting? I can help perhaps.
> On 3/8/2016 5:20 AM, Steve Wright wrote:
>> On 05/03/16 06:00, mike at midnighteng.com wrote:
>>> FYI There are RTCM /voter systems for app_rpt if you want to do it right.
>> Is there an example voting-RX project somewhere I can read about?
>> Non-RTCM please. I know about the RTCM and I'm looking at alternatives.
>> Many thanks,
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
> Joe Leikhim
> Leikhim and Associates
> Communications Consultants
> Oviedo, Florida
> JLeikhim at Leikhim.com
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
kg6uyz at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users