[App_rpt-users] Reverse AutoPatch

JJC cummingsj at gmail.com
Thu Mar 31 17:29:33 EDT 2016


As I observe the logs, that is not a hangup of the SIP call inbound, it's a
hangup of the audio playback through the radio... I should be able to dial
*610701 during the announcement (and well before the peer gets "tired of
being parked".. but all I get is a fast busy when I try to do this and the
phone continues to ring...


On Thu, Mar 31, 2016 at 2:49 PM, JJC <cummingsj at gmail.com> wrote:

> I removed the hangup, just for grins, dialplan now looks like this:
>>
>>
>> [ Context 'custom-gv-answer' created by 'pbx_config' ]
>>   's' =>            1. Answer()
>> [pbx_config]
>>                     2.
>> Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) [pbx_config]
>> -= 1 extension (2 priorities) in 1 context. =-
>
>
> Unfortunately it still hangs up right after announcing the extension, I'm
> searching for some type of a timeout value or similar now.
>
> On Thu, Mar 31, 2016 at 2:39 PM, Jim Duuuude <telesistant at hotmail.com>
> wrote:
>
>> Try putting an Answer() in the custom-gv-answer dialplan before the "Rpt"
>> line.
>>
>>
>> It is supposed to answer in silence, park the call, and wait for the
>> radio user to un-park it. The idea,
>>
>> is that in your dialplan, you do whatever you deem appropriate to tell
>> the user what is going on, with
>>
>> a recording or something.
>>
>>
>> ------------------------------
>> *From:* JJC <cummingsj at gmail.com>
>> *Sent:* Thursday, March 31, 2016 1:18 PM
>>
>> *To:* Jim Duuuude
>> *Cc:* app_rpt-users at ohnosec.org
>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>
>> It continues to ring on my end and it notes a disconnect in my SIP debug
>> when I hangup even after DTMF etc...
>>
>> On Thu, Mar 31, 2016 at 2:16 PM, Jim Duuuude <telesistant at hotmail.com>
>> wrote:
>>
>>> It looks to me like the inbound call hung up before you even hit the
>>> first DTMF tone on the radio side of things.
>>>
>>>
>>> ------------------------------
>>> *From:* JJC <cummingsj at gmail.com>
>>> *Sent:* Thursday, March 31, 2016 1:11 PM
>>>
>>> *To:* Jim Duuuude
>>> *Cc:* app_rpt-users at ohnosec.org
>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>
>>>   == Parked SIP/<obfuscated>-76904e08 on 701 at parkedcalls. Will timeout
>>> back to extension [custom-gv-answer] s, 2 in 45 seconds
>>>     -- Added extension '701' priority 1 to parkedcalls
>>>     -- Call Parking Called, lot: 701, timeout: 0, context: (null)
>>>     -- Music class default requested but no musiconhold loaded.
>>>     -- Music class default requested but no musiconhold loaded.
>>>     -- <DAHDI/pseudo-1661934131> Playing 'rpt/node' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/4' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/3' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/2' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/6' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/5' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'rpt/in-call' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/0' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/7' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/0' (language 'en')
>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/1' (language 'en')
>>>     -- Hungup 'DAHDI/pseudo-1661934131'
>>> [Mar 31 14:09:08] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char * duration 84 ms
>>> [Mar 31 14:09:08] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 6 duration 85 ms
>>> [Mar 31 14:09:09] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 1 duration 86 ms
>>> [Mar 31 14:09:09] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 0 duration 85 ms
>>> [Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 7 duration 86 ms
>>> [Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 0 duration 84 ms
>>> [Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 1 duration 127 ms
>>>     -- Hungup 'DAHDI/pseudo-176387851'
>>>   == SIP/<obfuscated>-76904e08 got tired of being parked
>>> [Mar 31 14:09:23] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char * duration 86 ms
>>> [Mar 31 14:09:23] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 6 duration 79 ms
>>> [Mar 31 14:09:24] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>> DTMF char 2 duration 106 ms
>>>     -- Hungup 'DAHDI/pseudo-959605867'
>>>     -- Hungup 'DAHDI/pseudo-1384624454'
>>>     -- Hungup 'DAHDI/pseudo-1284356810'
>>>
>>> On Thu, Mar 31, 2016 at 2:05 PM, Jim Duuuude <telesistant at hotmail.com>
>>> wrote:
>>>
>>>> Then it should be "*610701", since the autopatch acccess is *61, in
>>>> your case.
>>>>
>>>>
>>>> Could you "set verbose 4", make a couple of calls, attempting to
>>>> answer, and send me the output so
>>>>
>>>> that I can see what it is doing?
>>>>
>>>>
>>>> ------------------------------
>>>> *From:* JJC <cummingsj at gmail.com>
>>>> *Sent:* Thursday, March 31, 2016 9:08 AM
>>>>
>>>> *To:* Jim Duuuude
>>>> *Cc:* app_rpt-users at ohnosec.org
>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>
>>>> This is what I had thought from what I could find online.  My
>>>> features.conf is the default and I have not modified the section of the
>>>> extensions.conf.  I cannot find any stanza for the "parkedcalls" context
>>>> reference in features.conf.  When the call comes in, the system does
>>>> announce that there is an inbound call on the defined Node and extension of
>>>> 0701.  I have tried also *610701 etc... just given that *61 brings
>>>> autopatch up to dailtone..
>>>>
>>>>
>>>>> $ grep '^6' *
>>>>> rpt.conf:61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime =
>>>>> 20000  ; Autopatch up
>>>>> rpt.conf:62 = autopatchdn
>>>>>     ; Autopatch down
>>>>> rpt.conf:67 = remote,210 ; Send a *
>>>>> rpt.conf:69 = remote,211 ; Send a #
>>>>
>>>>
>>>>> $ grep -i park *
>>>>> chan_dahdi.conf:;   Also enables call parking (overrides the 'canpark'
>>>>> parameter)
>>>>> chan_dahdi.conf:; Allow call parking
>>>>> chan_dahdi.conf:; ('canpark=no' is overridden by 'transfer=yes')
>>>>> chan_dahdi.conf:canpark=yes
>>>>> extensions.conf:exten =>
>>>>> s,1,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>>> extensions.conf:exten = _07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>>>> extensions.conf:exten =>
>>>>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)
>>>>> features.conf:; Sample Call Features (parking, transfer, etc)
>>>>> configuration
>>>>> features.conf:parkext => 700 ; What extension to dial to park
>>>>> features.conf:parkpos => 701-720 ; What extensions to park calls on.
>>>>> These needs to be
>>>>> features.conf: ; and increments with one for the next parked call.
>>>>> features.conf:context => parkedcalls ; Which context parked calls are
>>>>> in
>>>>> modules.conf:load => app_parkandannounce.so ; Call Parking and
>>>>> Announce Application
>>>>
>>>>
>>>> repeater*CLI> dialplan show custom-gv-answer
>>>>> [ Context 'custom-gv-answer' created by 'pbx_config' ]
>>>>>   's' =>            1.
>>>>> Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) [pbx_config]
>>>>>                     2. Hangup()
>>>>> [pbx_config]
>>>>> -= 1 extension (2 priorities) in 1 context. =-
>>>>
>>>>
>>>> <features.conf>
>>>> [general]
>>>> parkext => 700                  ; What extension to dial to park
>>>> parkpos => 701-720              ; What extensions to park calls on.
>>>> These needs to be
>>>>                                 ; numeric, as Asterisk starts from the
>>>> start position
>>>>                                 ; and increments with one for the next
>>>> parked call.
>>>> context => parkedcalls          ; Which context parked calls are in
>>>>
>>>> <extensions.conf snip>
>>>> [radio]
>>>> exten = _X11,1,Goto(check_route|${EXTEN}|1);
>>>> exten = _NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)
>>>> exten = _1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)
>>>> exten = _07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>>> exten = 00,1,Goto(my-ip|s|1)
>>>>
>>>> On Wed, Mar 30, 2016 at 11:05 PM, Jim Duuuude <telesistant at hotmail.com>
>>>> wrote:
>>>>
>>>>> 701 is meant to un-park call parked in parking lot 1 in Asterisk.
>>>>>
>>>>> If your autopatch access code is *6, then *6 plus what it tells
>>>>>
>>>>> you to dial (0701) should work, if you have the call parking configured
>>>>>
>>>>> correctly (see features.conf), and accessed in the autopatch's
>>>>>
>>>>> Asterisk dialplan, as is in the default extensions.conf:
>>>>>
>>>>>
>>>>> exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>>>>
>>>>>
>>>>> In the default config that is shipped with ACID, this is how it is set
>>>>> up
>>>>>
>>>>> already.
>>>>>
>>>>>
>>>>> Jim
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------
>>>>> *From:* JJC <cummingsj at gmail.com>
>>>>> *Sent:* Wednesday, March 30, 2016 8:25 PM
>>>>>
>>>>> *To:* Jim Duuuude
>>>>> *Cc:* app_rpt-users at ohnosec.org
>>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>>
>>>>> It is now at the point where it announces there is an incoming call
>>>>> but none of the commands that I have found seem to be working.. trying:
>>>>>
>>>>> *60701
>>>>> *6701
>>>>>
>>>>> I also changed the extension from 701 to s with the same results
>>>>> (while removing the /701 from the register line), removed the Answer()
>>>>> directive
>>>>>
>>>>> <sip.conf>
>>>>> register=USER:<obfuscated>@THING/701
>>>>>
>>>>> [THING]
>>>>> type=peer
>>>>> allowguest=yes
>>>>> autocreatepeer=yes
>>>>> insecure=port,invite
>>>>> username=THING
>>>>> secret=<obfuscated>
>>>>> host=gvgw.simonics.com
>>>>> qualify=no
>>>>> allowexternaldomains=yes
>>>>> context=custom-gv-answer
>>>>>
>>>>> <extensions.conf>
>>>>> [custom-gv-answer]
>>>>> exten => 701,1,Answer()
>>>>> exten =>
>>>>> 701,n,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>>> exten => 701,n,Hangup
>>>>>
>>>>> On Wed, Mar 30, 2016 at 6:34 PM, JJC <cummingsj at gmail.com> wrote:
>>>>>
>>>>>> It's all one big mess, yes I did need that also.. It seems that when
>>>>>> I make changes even to my reverse auto patch it affects the error that I
>>>>>> noted.  Thanks for the info for sure!
>>>>>>
>>>>>> Sent from the iRoad
>>>>>>
>>>>>> On Mar 30, 2016, at 18:26, Jim Duuuude <telesistant at hotmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> No, that's a SIP problem, I thought you were needing info on the
>>>>>> reverse autopatch.
>>>>>>
>>>>>>
>>>>>> ------------------------------
>>>>>> *From:* JJC <cummingsj at gmail.com>
>>>>>> *Sent:* Wednesday, March 30, 2016 5:24 PM
>>>>>> *To:* Jim Duuuude
>>>>>> *Cc:* app_rpt-users at ohnosec.org
>>>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>>>
>>>>>> This will address the "found no matching peer or user" error?
>>>>>>
>>>>>> Sent from the iRoad
>>>>>>
>>>>>> On Mar 30, 2016, at 17:10, Jim Duuuude <telesistant at hotmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> A real, live example is in extensions.conf, just after the beginning
>>>>>> of the [allstar-sys] stanza:
>>>>>>
>>>>>>
>>>>>> exten =>
>>>>>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>>>>
>>>>>> exten => _1.,n,Hangup
>>>>>>
>>>>>>
>>>>>> In this case, it is passed 1 plus the node number as an extension. If
>>>>>> you replace "${EXTEN:1}" with your node
>>>>>>
>>>>>> number it should work.
>>>>>>
>>>>>>
>>>>>> Jim
>>>>>>
>>>>>>
>>>>>> ------------------------------
>>>>>> *From:* app_rpt-users-bounces at ohnosec.org <
>>>>>> app_rpt-users-bounces at ohnosec.org> on behalf of JJC <
>>>>>> cummingsj at gmail.com>
>>>>>> *Sent:* Wednesday, March 30, 2016 3:21 PM
>>>>>> *To:* app_rpt-users at ohnosec.org
>>>>>> *Subject:* [App_rpt-users] Reverse AutoPatch
>>>>>>
>>>>>> I have scoured the internet to find documentation about reverse
>>>>>> autopatch but have had no luck.  I have been able to get autopatch working
>>>>>> without a problem and have had _limited_ success in getting allstar(dial)
>>>>>> to answer.
>>>>>>
>>>>>> I was able to get allstar to answer and allow me to run DTMF with the
>>>>>> following, but really all that I want is reverse autopatch or both....
>>>>>>
>>>>>> If I make any real changes to the stanza in extensions.conf I get an
>>>>>> error like:
>>>>>> Using INVITE request as basis request - 1939985154 at 198.199.84.66
>>>>>> Found no matching peer or user for '198.199.84.66:5060'
>>>>>> [Mar 30 16:15:32] NOTICE[575]: chan_sip.c:14351
>>>>>> handle_request_invite: Failed to authenticate user "Caller ID Strings..."
>>>>>>
>>>>>> <sip.conf>
>>>>>> [general]
>>>>>> allowguest = no
>>>>>> match_auth_username=yes
>>>>>> register=REDACTED:XXXXXX at gvgw.simonics.com/2230
>>>>>>
>>>>>> context = default
>>>>>> allowoverlap = no               ; Disable overlap dialing support.
>>>>>> (Default is yes)
>>>>>> bindport = 5060                 ; UDP Port to bind to (SIP standard
>>>>>> port is 5060)
>>>>>> bindaddr = 0.0.0.0              ; IP address to bind to (0.0.0.0
>>>>>> binds to all)
>>>>>> srvlookup = yes                 ; Enable DNS SRV lookups on outbound
>>>>>> calls
>>>>>>
>>>>>>
>>>>>> [GV17193576518]
>>>>>> type=friend
>>>>>> autocreatepeer=yes
>>>>>> insecure=port,invite
>>>>>> username=REDACTED
>>>>>> secret=XXXXXXX
>>>>>> host=gvgw.simonics.com
>>>>>> qualify=no
>>>>>> ;permit=0.0.0.0/0.0.0.0
>>>>>> context=custom-gv-answer
>>>>>>
>>>>>> <extensions.conf>
>>>>>> [custom-gv-answer]
>>>>>> exten => 2230,1,Answer()
>>>>>> exten => 2230,n,Playback(rpt/node)
>>>>>> exten => 2230,n,Saydigits(${EXTEN:1})
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160331/2cbd3986/attachment.html>


More information about the App_rpt-users mailing list