[App_rpt-users] Reverse AutoPatch

JJC cummingsj at gmail.com
Thu Mar 31 17:31:09 EDT 2016


I made a few changes and managed to crash asterisk:

[Mar 31 15:27:42] WARNING[9822] channel.c: Channel type 'NULL' does not
have a fixup routine (for Parked/SIP/<obfuscated>-76902158<ZOMBIE>)!  Bad
things may happen.
[Mar 31 15:27:42] WARNING[9822] channel.c: PBX may not have been terminated
properly on 'Parked/Parked/SIP/<obfuscated>-76902158<ZOMBIE><ZOMBIE>'
[Mar 31 15:27:42] WARNING[560] channel.c: Exception flag set on
'SIP/<obfuscated>-76902158', but no exception handler

[custom-gv-answer]
exten => s,1,Answer()
exten => s,n,Goto(from-gv,${EXTEN},1)

[from-gv]
exten => _.,1,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
exten => _.,n,Hangup

On Thu, Mar 31, 2016 at 3:29 PM, JJC <cummingsj at gmail.com> wrote:

> As I observe the logs, that is not a hangup of the SIP call inbound, it's
> a hangup of the audio playback through the radio... I should be able to
> dial *610701 during the announcement (and well before the peer gets "tired
> of being parked".. but all I get is a fast busy when I try to do this and
> the phone continues to ring...
>
>
> On Thu, Mar 31, 2016 at 2:49 PM, JJC <cummingsj at gmail.com> wrote:
>
>> I removed the hangup, just for grins, dialplan now looks like this:
>>>
>>>
>>> [ Context 'custom-gv-answer' created by 'pbx_config' ]
>>>   's' =>            1. Answer()
>>> [pbx_config]
>>>                     2.
>>> Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) [pbx_config]
>>> -= 1 extension (2 priorities) in 1 context. =-
>>
>>
>> Unfortunately it still hangs up right after announcing the extension, I'm
>> searching for some type of a timeout value or similar now.
>>
>> On Thu, Mar 31, 2016 at 2:39 PM, Jim Duuuude <telesistant at hotmail.com>
>> wrote:
>>
>>> Try putting an Answer() in the custom-gv-answer dialplan before the
>>> "Rpt" line.
>>>
>>>
>>> It is supposed to answer in silence, park the call, and wait for the
>>> radio user to un-park it. The idea,
>>>
>>> is that in your dialplan, you do whatever you deem appropriate to tell
>>> the user what is going on, with
>>>
>>> a recording or something.
>>>
>>>
>>> ------------------------------
>>> *From:* JJC <cummingsj at gmail.com>
>>> *Sent:* Thursday, March 31, 2016 1:18 PM
>>>
>>> *To:* Jim Duuuude
>>> *Cc:* app_rpt-users at ohnosec.org
>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>
>>> It continues to ring on my end and it notes a disconnect in my SIP debug
>>> when I hangup even after DTMF etc...
>>>
>>> On Thu, Mar 31, 2016 at 2:16 PM, Jim Duuuude <telesistant at hotmail.com>
>>> wrote:
>>>
>>>> It looks to me like the inbound call hung up before you even hit the
>>>> first DTMF tone on the radio side of things.
>>>>
>>>>
>>>> ------------------------------
>>>> *From:* JJC <cummingsj at gmail.com>
>>>> *Sent:* Thursday, March 31, 2016 1:11 PM
>>>>
>>>> *To:* Jim Duuuude
>>>> *Cc:* app_rpt-users at ohnosec.org
>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>
>>>>   == Parked SIP/<obfuscated>-76904e08 on 701 at parkedcalls. Will timeout
>>>> back to extension [custom-gv-answer] s, 2 in 45 seconds
>>>>     -- Added extension '701' priority 1 to parkedcalls
>>>>     -- Call Parking Called, lot: 701, timeout: 0, context: (null)
>>>>     -- Music class default requested but no musiconhold loaded.
>>>>     -- Music class default requested but no musiconhold loaded.
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'rpt/node' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/4' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/3' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/2' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/6' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/5' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'rpt/in-call' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/0' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/7' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/0' (language 'en')
>>>>     -- <DAHDI/pseudo-1661934131> Playing 'digits/1' (language 'en')
>>>>     -- Hungup 'DAHDI/pseudo-1661934131'
>>>> [Mar 31 14:09:08] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char * duration 84 ms
>>>> [Mar 31 14:09:08] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 6 duration 85 ms
>>>> [Mar 31 14:09:09] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 1 duration 86 ms
>>>> [Mar 31 14:09:09] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 0 duration 85 ms
>>>> [Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 7 duration 86 ms
>>>> [Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 0 duration 84 ms
>>>> [Mar 31 14:09:10] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 1 duration 127 ms
>>>>     -- Hungup 'DAHDI/pseudo-176387851'
>>>>   == SIP/<obfuscated>-76904e08 got tired of being parked
>>>> [Mar 31 14:09:23] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char * duration 86 ms
>>>> [Mar 31 14:09:23] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 6 duration 79 ms
>>>> [Mar 31 14:09:24] NOTICE[577]: chan_usbradio.c:3064 usbradio_read: Got
>>>> DTMF char 2 duration 106 ms
>>>>     -- Hungup 'DAHDI/pseudo-959605867'
>>>>     -- Hungup 'DAHDI/pseudo-1384624454'
>>>>     -- Hungup 'DAHDI/pseudo-1284356810'
>>>>
>>>> On Thu, Mar 31, 2016 at 2:05 PM, Jim Duuuude <telesistant at hotmail.com>
>>>> wrote:
>>>>
>>>>> Then it should be "*610701", since the autopatch acccess is *61, in
>>>>> your case.
>>>>>
>>>>>
>>>>> Could you "set verbose 4", make a couple of calls, attempting to
>>>>> answer, and send me the output so
>>>>>
>>>>> that I can see what it is doing?
>>>>>
>>>>>
>>>>> ------------------------------
>>>>> *From:* JJC <cummingsj at gmail.com>
>>>>> *Sent:* Thursday, March 31, 2016 9:08 AM
>>>>>
>>>>> *To:* Jim Duuuude
>>>>> *Cc:* app_rpt-users at ohnosec.org
>>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>>
>>>>> This is what I had thought from what I could find online.  My
>>>>> features.conf is the default and I have not modified the section of the
>>>>> extensions.conf.  I cannot find any stanza for the "parkedcalls" context
>>>>> reference in features.conf.  When the call comes in, the system does
>>>>> announce that there is an inbound call on the defined Node and extension of
>>>>> 0701.  I have tried also *610701 etc... just given that *61 brings
>>>>> autopatch up to dailtone..
>>>>>
>>>>>
>>>>>> $ grep '^6' *
>>>>>> rpt.conf:61 = autopatchup,noct = 1,farenddisconnect = 1,dialtime =
>>>>>> 20000  ; Autopatch up
>>>>>> rpt.conf:62 = autopatchdn
>>>>>>     ; Autopatch down
>>>>>> rpt.conf:67 = remote,210 ; Send a *
>>>>>> rpt.conf:69 = remote,211 ; Send a #
>>>>>
>>>>>
>>>>>> $ grep -i park *
>>>>>> chan_dahdi.conf:;   Also enables call parking (overrides the
>>>>>> 'canpark' parameter)
>>>>>> chan_dahdi.conf:; Allow call parking
>>>>>> chan_dahdi.conf:; ('canpark=no' is overridden by 'transfer=yes')
>>>>>> chan_dahdi.conf:canpark=yes
>>>>>> extensions.conf:exten =>
>>>>>> s,1,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>>>> extensions.conf:exten = _07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>>>>> extensions.conf:exten =>
>>>>>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)
>>>>>> features.conf:; Sample Call Features (parking, transfer, etc)
>>>>>> configuration
>>>>>> features.conf:parkext => 700 ; What extension to dial to park
>>>>>> features.conf:parkpos => 701-720 ; What extensions to park calls on.
>>>>>> These needs to be
>>>>>> features.conf: ; and increments with one for the next parked call.
>>>>>> features.conf:context => parkedcalls ; Which context parked calls
>>>>>> are in
>>>>>> modules.conf:load => app_parkandannounce.so ; Call Parking and
>>>>>> Announce Application
>>>>>
>>>>>
>>>>> repeater*CLI> dialplan show custom-gv-answer
>>>>>> [ Context 'custom-gv-answer' created by 'pbx_config' ]
>>>>>>   's' =>            1.
>>>>>> Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) [pbx_config]
>>>>>>                     2. Hangup()
>>>>>> [pbx_config]
>>>>>> -= 1 extension (2 priorities) in 1 context. =-
>>>>>
>>>>>
>>>>> <features.conf>
>>>>> [general]
>>>>> parkext => 700                  ; What extension to dial to park
>>>>> parkpos => 701-720              ; What extensions to park calls on.
>>>>> These needs to be
>>>>>                                 ; numeric, as Asterisk starts from the
>>>>> start position
>>>>>                                 ; and increments with one for the next
>>>>> parked call.
>>>>> context => parkedcalls          ; Which context parked calls are in
>>>>>
>>>>> <extensions.conf snip>
>>>>> [radio]
>>>>> exten = _X11,1,Goto(check_route|${EXTEN}|1);
>>>>> exten = _NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)
>>>>> exten = _1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)
>>>>> exten = _07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>>>> exten = 00,1,Goto(my-ip|s|1)
>>>>>
>>>>> On Wed, Mar 30, 2016 at 11:05 PM, Jim Duuuude <telesistant at hotmail.com
>>>>> > wrote:
>>>>>
>>>>>> 701 is meant to un-park call parked in parking lot 1 in Asterisk.
>>>>>>
>>>>>> If your autopatch access code is *6, then *6 plus what it tells
>>>>>>
>>>>>> you to dial (0701) should work, if you have the call parking
>>>>>> configured
>>>>>>
>>>>>> correctly (see features.conf), and accessed in the autopatch's
>>>>>>
>>>>>> Asterisk dialplan, as is in the default extensions.conf:
>>>>>>
>>>>>>
>>>>>> exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)
>>>>>>
>>>>>>
>>>>>> In the default config that is shipped with ACID, this is how it is
>>>>>> set up
>>>>>>
>>>>>> already.
>>>>>>
>>>>>>
>>>>>> Jim
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------
>>>>>> *From:* JJC <cummingsj at gmail.com>
>>>>>> *Sent:* Wednesday, March 30, 2016 8:25 PM
>>>>>>
>>>>>> *To:* Jim Duuuude
>>>>>> *Cc:* app_rpt-users at ohnosec.org
>>>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>>>
>>>>>> It is now at the point where it announces there is an incoming call
>>>>>> but none of the commands that I have found seem to be working.. trying:
>>>>>>
>>>>>> *60701
>>>>>> *6701
>>>>>>
>>>>>> I also changed the extension from 701 to s with the same results
>>>>>> (while removing the /701 from the register line), removed the Answer()
>>>>>> directive
>>>>>>
>>>>>> <sip.conf>
>>>>>> register=USER:<obfuscated>@THING/701
>>>>>>
>>>>>> [THING]
>>>>>> type=peer
>>>>>> allowguest=yes
>>>>>> autocreatepeer=yes
>>>>>> insecure=port,invite
>>>>>> username=THING
>>>>>> secret=<obfuscated>
>>>>>> host=gvgw.simonics.com
>>>>>> qualify=no
>>>>>> allowexternaldomains=yes
>>>>>> context=custom-gv-answer
>>>>>>
>>>>>> <extensions.conf>
>>>>>> [custom-gv-answer]
>>>>>> exten => 701,1,Answer()
>>>>>> exten =>
>>>>>> 701,n,Rpt(43265|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>>>> exten => 701,n,Hangup
>>>>>>
>>>>>> On Wed, Mar 30, 2016 at 6:34 PM, JJC <cummingsj at gmail.com> wrote:
>>>>>>
>>>>>>> It's all one big mess, yes I did need that also.. It seems that when
>>>>>>> I make changes even to my reverse auto patch it affects the error that I
>>>>>>> noted.  Thanks for the info for sure!
>>>>>>>
>>>>>>> Sent from the iRoad
>>>>>>>
>>>>>>> On Mar 30, 2016, at 18:26, Jim Duuuude <telesistant at hotmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>> No, that's a SIP problem, I thought you were needing info on the
>>>>>>> reverse autopatch.
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------
>>>>>>> *From:* JJC <cummingsj at gmail.com>
>>>>>>> *Sent:* Wednesday, March 30, 2016 5:24 PM
>>>>>>> *To:* Jim Duuuude
>>>>>>> *Cc:* app_rpt-users at ohnosec.org
>>>>>>> *Subject:* Re: [App_rpt-users] Reverse AutoPatch
>>>>>>>
>>>>>>> This will address the "found no matching peer or user" error?
>>>>>>>
>>>>>>> Sent from the iRoad
>>>>>>>
>>>>>>> On Mar 30, 2016, at 17:10, Jim Duuuude <telesistant at hotmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>> A real, live example is in extensions.conf, just after the beginning
>>>>>>> of the [allstar-sys] stanza:
>>>>>>>
>>>>>>>
>>>>>>> exten =>
>>>>>>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120) 75
>>>>>>>
>>>>>>> exten => _1.,n,Hangup
>>>>>>>
>>>>>>>
>>>>>>> In this case, it is passed 1 plus the node number as an extension.
>>>>>>> If you replace "${EXTEN:1}" with your node
>>>>>>>
>>>>>>> number it should work.
>>>>>>>
>>>>>>>
>>>>>>> Jim
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------
>>>>>>> *From:* app_rpt-users-bounces at ohnosec.org <
>>>>>>> app_rpt-users-bounces at ohnosec.org> on behalf of JJC <
>>>>>>> cummingsj at gmail.com>
>>>>>>> *Sent:* Wednesday, March 30, 2016 3:21 PM
>>>>>>> *To:* app_rpt-users at ohnosec.org
>>>>>>> *Subject:* [App_rpt-users] Reverse AutoPatch
>>>>>>>
>>>>>>> I have scoured the internet to find documentation about reverse
>>>>>>> autopatch but have had no luck.  I have been able to get autopatch working
>>>>>>> without a problem and have had _limited_ success in getting allstar(dial)
>>>>>>> to answer.
>>>>>>>
>>>>>>> I was able to get allstar to answer and allow me to run DTMF with
>>>>>>> the following, but really all that I want is reverse autopatch or both....
>>>>>>>
>>>>>>> If I make any real changes to the stanza in extensions.conf I get an
>>>>>>> error like:
>>>>>>> Using INVITE request as basis request - 1939985154 at 198.199.84.66
>>>>>>> Found no matching peer or user for '198.199.84.66:5060'
>>>>>>> [Mar 30 16:15:32] NOTICE[575]: chan_sip.c:14351
>>>>>>> handle_request_invite: Failed to authenticate user "Caller ID Strings..."
>>>>>>>
>>>>>>> <sip.conf>
>>>>>>> [general]
>>>>>>> allowguest = no
>>>>>>> match_auth_username=yes
>>>>>>> register=REDACTED:XXXXXX at gvgw.simonics.com/2230
>>>>>>>
>>>>>>> context = default
>>>>>>> allowoverlap = no               ; Disable overlap dialing support.
>>>>>>> (Default is yes)
>>>>>>> bindport = 5060                 ; UDP Port to bind to (SIP standard
>>>>>>> port is 5060)
>>>>>>> bindaddr = 0.0.0.0              ; IP address to bind to (0.0.0.0
>>>>>>> binds to all)
>>>>>>> srvlookup = yes                 ; Enable DNS SRV lookups on outbound
>>>>>>> calls
>>>>>>>
>>>>>>>
>>>>>>> [GV17193576518]
>>>>>>> type=friend
>>>>>>> autocreatepeer=yes
>>>>>>> insecure=port,invite
>>>>>>> username=REDACTED
>>>>>>> secret=XXXXXXX
>>>>>>> host=gvgw.simonics.com
>>>>>>> qualify=no
>>>>>>> ;permit=0.0.0.0/0.0.0.0
>>>>>>> context=custom-gv-answer
>>>>>>>
>>>>>>> <extensions.conf>
>>>>>>> [custom-gv-answer]
>>>>>>> exten => 2230,1,Answer()
>>>>>>> exten => 2230,n,Playback(rpt/node)
>>>>>>> exten => 2230,n,Saydigits(${EXTEN:1})
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20160331/37f2d9eb/attachment.html>


More information about the App_rpt-users mailing list