[App_rpt-users] No PL Tone

Chris Viningre chrisviningre at gmail.com
Sat Nov 5 19:38:26 EDT 2016


I tried the settings and still no tone squelch. This is what I get
when I do a radio-tune-menu. I dont know if this would help.

Please enter your selection now: 4
INFO: RX CTCSS ADJUST START.
target=2400 tolerance=100
tries=0, setting=1.000000, meas=0
tries=1, setting=8.000000, meas=0
tries=2, setting=8.000000, meas=0
tries=3, setting=8.000000, meas=0
tries=4, setting=8.000000, meas=0
tries=5, setting=8.000000, meas=0
tries=6, setting=8.000000, meas=0
tries=7, setting=8.000000, meas=0
tries=8, setting=8.000000, meas=0
tries=9, setting=8.000000, meas=0
tries=10, setting=8.000000, meas=0
tries=11, setting=8.000000, meas=0
DONE tries=12, setting=8.000000, meas=0.00
ERROR: RX CTCSS GAIN ADJUST FAILED.
Chris Viningre
70 W. Roadrunner
Salt Flat, Texas 79847
C:(915) 504-1510
chrisviningre at gmail.com
Amateur Radio Operator: WS5B
https://www.qrz.com/db/ws5b
http://www.reverbnation.com/chrisviningre


On Sat, Nov 5, 2016 at 3:40 PM, REDBUTTON_CTRL <jrorke at cogeco.ca> wrote:
> Are you trying to get the pl tone to decode and encode?
>
> If you want it to decode tones, you must be connected to vol/Sq hi
> (discriminator) signal on the master II for receive audio input. And you
> must set rxdemod to flat in the usbradio.conf file.
>
> Also In usbradio.conf, set txmixa to voice and connect to the mic input.
> set txmixb to tone and connect to the tx pl tone input on the exciter.
>
> Recal all audio levels.
>
> hope this helps.
>
>
> cheers!
>
> Jon VA3RQ
>
> On 11/5/2016 5:19 PM, Chris Viningre wrote:
>>
>> I am trying to get the PL tone of 100.0 hz to work on my GE Mastr II
>> repeater. I'm using a URI interface on a laptop running Dail software.
>> Everything is working other than the tones. Here is my rpt.conf and
>> usbradio.conf. Thanks for any help.
>>
>> Chris Viningre
>> 70 W. Roadrunner
>> Salt Flat, Texas 79847
>> C:(915) 504-1510
>> chrisviningre at gmail.com
>> Amateur Radio Operator: WS5B
>> https://www.qrz.com/db/ws5b
>> http://www.reverbnation.com/chrisviningre
>>
>> Radio Repeater configuration file (for use with app_rpt)
>>
>> ;
>>
>>
>>
>> ;
>>
>> ; Your Repeater
>>
>> ;
>>
>>
>>
>> [43934] ; Change this to your assigned node number
>>
>>
>> rxchannel=Radio/usb43934
>>
>> duplex=2
>>
>> erxgain=-3
>>
>> etxgain=3
>>
>> ;controlstates=controlstates
>>
>> scheduler=schedule43934
>>
>> morse=morse43934
>>
>> macro=macro43934
>>
>> functions=functions43934
>>
>> phone_functions=functions43934
>>
>> link_functions=functions43934
>>
>> telemetry=telemetry
>>
>> wait_times=wait-times
>>
>> context = radio
>>
>> callerid = "Repeater"<0000000000>
>>
>> idrecording = |iWS5B
>>
>> accountcode=RADIO
>>
>> hangtime=1000
>>
>>
>>
>> ;
>>
>> ; Usbradio channel driver Configuration File
>>
>> ;
>>
>>
>> [general]
>>
>>
>> [usb43934]
>>
>>
>> hdwtype=0
>>
>> rxboost=1
>>
>> txboost=1
>>
>> rxctcssrelax=1
>>
>> txctcssdefault=100.0
>>
>> rxctcssfreqs=100.0
>>
>> txctcssfreqs=100.0
>>
>> ;rxctcssoverride=0
>>
>> carrierfrom=usb
>>
>> ctcssfrom=usb
>>
>> rxdemod=speaker
>>
>> txprelim=no
>>
>> txlimonly=no
>>
>> txtoctype=no
>>
>> txmixa=composite
>>
>> txmixb=no
>>
>> invertptt=0
>>
>> duplex=1
>>
>> rxondelay=0
>>
>> rxnoisefiltype=0
>>
>> eeprom=0
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>> the bottom of the page. Enter your email address and press the "Unsubscribe
>> or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> the bottom of the page. Enter your email address and press the "Unsubscribe
> or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.



More information about the App_rpt-users mailing list