[App_rpt-users] Podcast Server

Danny mynixmail at gmail.com
Wed Nov 30 10:30:44 EST 2016


On Nov 30 16, Skyler F :
> To: Danny <mynixmail at gmail.com>, "app_rpt-users at ohnosec.org"
>  <app_rpt-users at ohnosec.org>
> Date: Wed, 30 Nov 2016 08:21:34 -0700
> From: Skyler F <electricity440 at gmail.com>
> Subject: Re: [App_rpt-users] Podcast Server
> 
 Does this system respect time out timers and unkey periodically?

Hi Skyler,

Yes it does. Each transmission is 180 seconds in duration, by which it unkeys
and 10 seconds later it will key up again.

Danny
ZS6XOX
> 
> Thanks,
> Skyler
> 
> On Wed, Nov 30, 2016 at 5:29 AM, Danny <mynixmail at gmail.com> wrote:
> 
>     Hi,
> 
>     I have setup a server that plays Amateur Radio related podcasts, I call it
>     "Play
>     Something". Every time a request is recieved (via e-mail) by a (registered)
>     callsign, the system plays one of these podcasts to all connected nodes.
> 
>     This is for all to use. Some of the podcasts are:
>     Everything Ham Radio
>     QSO Today
>     This week in Amateur Radio
>     Foundations of Amateur Radio
>     Ted Randall
>     and many more ...
> 
>     To register for this do the following:
>     Send mail to:allstar44081 at gmail.com
>     The "Subject" should only contain the word "Register"
>     The "Body" should contain the following
>     "??CALLSIGN:E-MAIL_ADDRESS:A_PASSWORD??"
> 
>     Note the "??" at the start and end and the ":" in between.
> 
>     Nothing else should be in the body.
> 
>     After you have registered you will receive a replay instructing you on how
>     to
>     use the system.
> 
>     One caveat, Apple iPhones do not translate/parse/send "Subject" lines
>     according
>     to mail standards. So please use any other means to register.
> 
> 
>     Thank you
> 
>     Danny
>     ZS6XOX
> 
>     AllStar 44081
>     EchoLink ZS6XOX-R
> 
>     73's
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
>     To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
>     mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
>     Enter your email address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a message to
>     the list detailing the problem.
> 
> 
> 
> 
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com



More information about the App_rpt-users mailing list