[App_rpt-users] app_rpt with asterisk 1.8.11
Ramesh at va3uv.com
Tue Oct 4 07:41:16 EDT 2016
On 10/4/2016 5:28 AM, Mohit Duggal wrote:
> Hi ,
> We are looking for an option of integrating app_rpt with asterisk
> version 1.8.11 using URI or any other option having four ports. Please
> help if someone has experience in this.
> We need to integrate with the radios in following three scenarios :
> 1.The solution has the following aspects :
> a.In case user has radios with DTMF keypad he shall be able to dial
> any extension via radio.
> b.In case radio does not support DTMF keypad one shall be able to dial
> to fixed extension using COR output from radio.
> c.In case radio does not support DTMF keypad or COR output from radio
> , by sensing the audible energy shall be able to dial to fixed
> extension. For 1(c) we need the following requirements as well :
> i)Audio level should be field adjustable. User should be able to
> increase of decrease audio gain to his satisfaction.
> ii) Speech should switch instantaneously across Radios with delay of
> less than 200 m sec.
> iii) The VOX and VMR feature must also include an adjustable audio
> sampling so that the radio input received during the time required
> making a valid signal is not clipped off.
> iv) The speech spectrum detector should be capable of filtering out
> fixed/ variable frequency sirens, whistles and horns without falsely
> activating cross connected radio networks.
> Solution is complete in case it handles all three scenarios.
> Please suggest in case you have solution for the same using app_rpt or
<-- Is this for amateur use?
1b is a bit far-fetched; c is called 'Siri' - and even she messes up...
ever tried to send a text message by dictating while driving?
c (i) is called the volume control on the user radio!
So, I have to wonder where this spec came from!
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users