[App_rpt-users] IAX/Zoiper Audio and Level

Te Bussell welfarecat at comcast.net
Sat Oct 8 03:46:03 EDT 2016


I will poke around on Saturday to see if I find a copy of the failed script archived on my laptop, but I fear it was overwritten. Big mistake, if that occurred. This is not a script so much as it is the typical Dial R Pi lines that allow the PC IaxRpt client to work, but also allow the Android application to work. In some ways, it would seem to be the same parameters. Maybe it requires and if/else conditional statement. I just don't know. I could not sleep, and I needed to take medication, so I decided to shine a light on this. 

It was suggested this may be a limitation of the R Pi. I find that difficult to accept when it can run Allmon2, and many common but ancient programs like groff are in the file system. It is not much different than UNIX file systems I used to keep civilian and military aircraft in the sky.

Thanks...

Bill KB9WKR

Sent from my iPad

> On Oct 8, 2016, at 3:12 AM, Steve Zingman <szingman at msgstor.com> wrote:
> 
> What is the script?
> 
> On Oct 8, 2016 3:06 AM, Te Bussell <welfarecat at comcast.net> wrote:
> I downloaded the Android app on my Samsung phone based on the message quoted below. I have IaxRpt working from my laptop along with Allmon2. I had some help from a brilliant young woman, and I thank her.
> 
> HERE IS THE PROBLEM:  when she tried to set up the script to work with both Android and PC IaxRpt, the script had a syntax error, and would not work. 
> 
> I used to modify and write UNIX scripts for an ancient but capable aerospace publishing system. I know that a misplaced or unbalanced operator will fail. Most of my scripts were ksh, and I knew a method in those days to actually test the script within a command line environment. Sorry to say I have cobwebs on what I did in the past.
> 
> So it would be helpful to see an example of a script that accomplishes both goals as stated above. In addition, I don't see a way forward for setting up the Android app.
> 
> Cheers and 73
> 
> KB9WKR
> 
> Bill
> 
> 
> Sent from my iPad
> 
> On Sep 26, 2016, at 8:54 PM, Te Bussell <welfarecat at comcast.net> wrote:
> 
> 
> 
> Sent from my iPad
> 
> Begin forwarded message:
> 
> From: Steve Zingman <szingman at msgstor.com>
> Date: September 26, 2016 at 1:25:56 PM EDT
> To: no1pc at yahoo.com, "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] IAX/Zoiper Audio and Level
> 
> There is a Android app written to connect to AllStar. It has a mic gain control.
> <https://play.google.com/store/apps/details?id=org.dvswitch>
> 
> On 9/24/2016 8:12 PM, no1pc at yahoo.com wrote:
> 
> Just got things setup so Zoiper works on my node.
> 
> I can connect and pass voice from PC client and Droid clients - but the
> audio level from those going out to the Transmitter is low.  Is there a
> way to adjust that?
> 
> The iPhone client connects but does not yet pass voice... still working
> on that.
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> -- 
> "Just say no to world domination"
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20161008/fc2423d7/attachment.html>


More information about the App_rpt-users mailing list