[App_rpt-users] Anyone have MPLAB C compiler?

Sam Skolfield kj6qfs at gmail.com
Sat Oct 29 07:18:27 EDT 2016

Looks like I'm in over my head a bit, not sure if I even need the C

If anyone feels like helping me with a quick Teamviewer session, I'd really
appreciate it. Board is hooked up to PICKit, and MPLAB is  successfully
recognizing the target device, just need some help loading the bootloader.
I followed instructions, MPLAB said it wrote successfully, but no joy, the
LED doesn't flash like I'm used to with the RTCMs when they first boot, and
I can't capture it with the EBLEX software.

PIC newbie aka KJ6QFS

On Fri, Oct 28, 2016 at 10:40 PM, Sam Skolfield <kj6qfs at gmail.com> wrote:

> Hello all,
> It appears as if the link in the " votersystem.pdf " for the MPLAB C
> Compiler for PIC24 and dsPIC v3.25 in LITE mode points to a page that
> indicates the download is no longer available. I've done quite a bit of
> googling for an alternate source, and can find nothing. Does anyone still
> have a copy they could send my way? I have a couple of voter boards running
> 1.07 (09/15/2012) and they keep hiccuping, dropping PTT and connection to
> server whenever transmitting. I have a PICkit 3 and want to try blowing the
> latest firmware in to see if it fixes.
> Thanks,
> --
> Sam Skolfield

Sam Skolfield
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20161029/8dddff45/attachment.html>

More information about the App_rpt-users mailing list