[App_rpt-users] Micro-Node RTCM

Bob Pyke k6ecm1 at gmail.com
Tue Apr 25 22:44:37 EDT 2017

A software based system cannot provide the timing required for a voter system. See https://www.allstarlink.org/votersystem.pdf under "Description," first two paragraphs.


Sent from iPad

> On Apr 25, 2017, at 7:32 PM, Doug Kingston <dpk at randomnotes.org> wrote:
> I am considering using these for a amateur repeater voting application.  The alternative would be to roll my own with a Raspberry Pi 3 and probably the HamVOIP.org distribution.  Who out there is using the RTCM?  I can find very little information beyond the manual and I am concerned that the software may not be maintained and that there is not enough access to the underlying Linux system.
> Who can tell me more about the RTCM?
> Has anyone rolled their own with a Pi3?  Any advice there?
> -Doug-
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170425/a1e8aee1/attachment.html>

More information about the App_rpt-users mailing list