[App_rpt-users] Micro-Node RTCM

Michael Hebert mhebert1975 at gmail.com
Tue Apr 25 22:49:42 EDT 2017


That is why you use an RTCM that is hardware based with a Garmin GPS-18x
LVC attached to it.

On Tue, Apr 25, 2017 at 9:44 PM, Bob Pyke <k6ecm1 at gmail.com> wrote:

> A software based system cannot provide the timing required for a voter
> system. See https://www.allstarlink.org/votersystem.pdf under
> "Description," first two paragraphs.
>
> Thanks,
> Bob
> k6ecm
> 73
>
> Sent from iPad
>
>
> On Apr 25, 2017, at 7:32 PM, Doug Kingston <dpk at randomnotes.org> wrote:
>
> I am considering using these for a amateur repeater voting application.
> The alternative would be to roll my own with a Raspberry Pi 3 and probably
> the HamVOIP.org distribution.  Who out there is using the RTCM?  I can
> find very little information beyond the manual and I am concerned that the
> software may not be maintained and that there is not enough access to the
> underlying Linux system.
>
> Who can tell me more about the RTCM?
>
> Has anyone rolled their own with a Pi3?  Any advice there?
>
> -Doug-
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170425/9e8a3617/attachment.html>


More information about the App_rpt-users mailing list