[App_rpt-users] Micro-Node RTCM

Doug Kingston dpk at randomnotes.org
Wed Apr 26 01:54:23 EDT 2017


Thank you Mark, that was very informative.

My guess is that this device is unlikely to be able to "defend" itself very
well and should probably be placed behind a restrictive firewall.  Do you
concur?

-Doug-

On Tue, Apr 25, 2017 at 10:26 PM, Mark Guibord <mark at micro-node.com> wrote:

> The RTCM uses a 16 bit DSP with a tightly integrated interrupt driven
> firmware package written in c
>
>
>
> http://www.microchip.com/wwwproducts/en/dsPIC33FJ128GP804
>
>
>
> If you're interested here is a link to the open-source software for the
> RTCM..
>
>
>
> http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-
> firmware/?root=svn
>
>
>
> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
> *On Behalf Of *Doug Kingston
> *Sent:* Tuesday, April 25, 2017 9:41 PM
> *To:* Users of Asterisk app_rpt
> *Subject:* Re: [App_rpt-users] Micro-Node RTCM
>
>
>
> I know that I would have a GPS with 1pps feed to get the timing.  Once you
> have that, what is different in an RTCM other than nice packaging?
>
> What is the core processor technology inside the RTCM.  I am assuming is
> some form of ARM processor.  Can you can you get a root shell and use SSH
> to access?
>
>
>
> -Doug-
>
>
>
> On Tue, Apr 25, 2017 at 7:50 PM, Fredric Moses <fred at moses.bz> wrote:
>
> You seem confused… you still need a linux system running app_rpt with the
> RTCM’s…  think of the RTCM as an ethernet based radio interface vs usb..
> But that radio interface when you add GPS to each one can do voting with
> others.. and with some more work simulcast transmitting…
>
> We have some 50-60 RTCM’s deployed and love them… Getting ready to rebuild
> another clubs VHF repeater voter system with a 6 site RTCM based voting
> system.  I just started testing the new hamvoip rPi3 image with some rtcm’s
> myself...
>
> --
> Fredric Moses - W8FSM - WQOG498
> fred at moses.bz
>
>
> > On Apr 25, 2017, at 22:32, Doug Kingston <dpk at randomnotes.org> wrote:
> >
> > I am considering using these for a amateur repeater voting application.
> The alternative would be to roll my own with a Raspberry Pi 3 and probably
> the HamVOIP.org distribution.  Who out there is using the RTCM?  I can find
> very little information beyond the manual and I am concerned that the
> software may not be maintained and that there is not enough access to the
> underlying Linux system.
> >
> > Who can tell me more about the RTCM?
> >
> > Has anyone rolled their own with a Pi3?  Any advice there?
> >
> > -Doug-
>
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170425/a693b6c1/attachment.html>


More information about the App_rpt-users mailing list