[App_rpt-users] Micro-Node RTCM

Doug Kingston dpk at randomnotes.org
Wed Apr 26 01:59:39 EDT 2017


Thanks, Fredric.

I had assumed it was running app_voter but I see now its just running its
own private codebase.  If you have a separate repeater controller like an
Arcom 210, there is no need for any Linux unless you are planning to run
Allstar, Echolink or IRLP.  Have I interpreted this correctly?

-Doug-

On Tue, Apr 25, 2017 at 7:50 PM, Fredric Moses <fred at moses.bz> wrote:

> You seem confused… you still need a linux system running app_rpt with the
> RTCM’s…  think of the RTCM as an ethernet based radio interface vs usb..
> But that radio interface when you add GPS to each one can do voting with
> others.. and with some more work simulcast transmitting…
>
> We have some 50-60 RTCM’s deployed and love them… Getting ready to rebuild
> another clubs VHF repeater voter system with a 6 site RTCM based voting
> system.  I just started testing the new hamvoip rPi3 image with some rtcm’s
> myself...
>
> --
> Fredric Moses - W8FSM - WQOG498
> fred at moses.bz
>
> > On Apr 25, 2017, at 22:32, Doug Kingston <dpk at randomnotes.org> wrote:
> >
> > I am considering using these for a amateur repeater voting application.
> The alternative would be to roll my own with a Raspberry Pi 3 and probably
> the HamVOIP.org distribution.  Who out there is using the RTCM?  I can find
> very little information beyond the manual and I am concerned that the
> software may not be maintained and that there is not enough access to the
> underlying Linux system.
> >
> > Who can tell me more about the RTCM?
> >
> > Has anyone rolled their own with a Pi3?  Any advice there?
> >
> > -Doug-
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/attachments/20170425/3364a8d1/attachment-0001.html>


More information about the App_rpt-users mailing list