[App_rpt-users] Is it possible to have voltage read back?
shawpbx at gmail.com
Fri Apr 28 23:05:00 EDT 2017
Food for thought.. How about an old UPS. Wire it to your battery and use
upsmon.. I would check to see if upsmon will write a text file first.. Look
at using an Arduino. Then have ASL read it.
"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
On Fri, Apr 28, 2017 at 3:05 PM, Loren Tedford <lorentedford at gmail.com>
> I was wondering if it was possible to have voltages read back on the
> repeater site.. Mainly 12 volt type scenario what type of equipment would i
> need to make this work with my current allstarlink system and how would it
> I am running Dial on a PC with a pico power supply.
> Loren Tedford (KC9ZHV)
> Fax: 1-618-551-2755 <(618)%20551-2755>
> Email: lorentedford at gmail.com
> Email: KC9ZHV at KC9ZHV.com
> http://Ltcraft.net <http://ltcraft.net/>
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the App_rpt-users